ISCAR Main Banner
  •  
  GROOVE TURN Cutting Conditions       
Feed:  Low Medium High
Workpiece Material Groups :
Hardness HB
             		Workpiece Form :
Round Bar Interrupted
Application Type
External / Internal 		Insert Type
Utility / Precision
Sub Application :
Family Tool Type :
T max :
W Range :
Tool Holder:
T max : W range :
Chipformer selection:

 
Insert:

Insert Width:
Grade:
  
CALCULATE RE-CALCULATE
Recomendation Results:
Depth of cut (ap)   {mm}
Feed rate (f)   {mm/rev}
Cutting speed (Vc)   {m/min}
Spindle speed (n)   {rpm}
Tool life (T)   {min}
Time per pass (t)  {sec}
Insert T max  {mm}
Insert Width  {mm}
Metal removal rate (Q)  {cm3/min}
Net power (Pc)   {Kw}
Max profile height (Rt)   {μm}
Average roughness (Ra)   {μm}
Theoretical roughness (RMS)  {μm}

Elem.1  Elem.2  corner radius insert length incert ic
Ap min Ap max A=Ap*F KrKra Ka Kd KcoKm default grade: - recomend Vc
group grade : - default group Vc
Vc= (Elm1  /  (     T    *    A    ) +   Elm2 )  *  Kco  *   Kr   *   Km *   Kra  *  Kd
Vc=( / ( * ) + ) * * * * * =
X = Current Vc = Vc * ( recomendedVc/groupVc );
factor * Vc (incase of 21-30) a-front end width
Coolant thru :
YES NO
Machine Rigidity :
Good Average Poor
Holder Rigidity :
Good Average Poor
W.P. Diameter (Dmax)   {mm}
Cutting Length(lr, lz)   {mm}