ISCAR Main Banner
  •  
  Parting Cutting Conditions       
Feed:
Low Medium
Insert Type
Utility / Precision
Workpiece Material Groups :
Hardness HB
             		Workpiece Form :
Round Bar Interrupted Pipe
W.P. Diameter (Dmax)   {mm}
Radial Cutting Length (lr)   {mm}
Sub Application :
Family Tool Type:
D max:
W Range:
Tool Holder:
D max : W range :
Chipformer selection:

 
Insert :
Grade:
CALCULATE RE-CALCULATE
Recomendation Results:
Insert Width  {mm} 
Feed rate (f)  {mm/rev}
Cutting speed (Vc)  {m/min}
Spindle speed (n)  {rpm}
Tool life (T)  {min}
Time per pass (t)  {sec}
Insert D max  {mm}
Metal removal rate (Q)  {cm3/min}
Net power (Pc)   {Kw}
Note:
When Parting Toward Center - after cutting 95% for the work piece radius - reduce the feed by 75% from the Original Parting Feed Value. This will reduce the burr in the center

Elem.1  Elem.2  corner radius insert length incert ic
Ap min Ap max A=Ap*F KrKra Ka Kd KcoKm default grade: - recomend Vc
group grade : - default group Vc
Vc= (Elm1  /  (     T    *    A    ) +   Elm2 )  *  Kco  *   Kr   *   Km *   Kra  *  Kd
Vc=( / ( * ) + ) * * * * * =
X = Current Vc = Vc * ( recomendedVc/groupVc );
factor * Vc (incase of 21-30) a-front end width
Coolant thru :
YES NO
Machine Rigidity :
Good Average Poor
Holder Rigidity :
Good Average Poor