DGFHR/L-B-D..(R/L) :  Double- and single-ended, parting and grooving reinforced blades for double-ended DGN inserts.  
 
 
Parting   Ext. Grooving  
  Designation
B1Mounted on all ISCAR standard blocks.
W
minFor DG: 1.0 insert - modify holder.
W
max

A

A2

l1

H2

h1

h4

Tmax-r
D
maxThe specified limit refers to the tool.

R/L
  DGFHL 26B-2D50  26.0  1.90  2.50  1.60  8.0  110.00  33.7  21.4  3.6  18.00  42.0  L
  DGFHR 26B-2D50  26.0  1.90  2.50  1.60  8.0  110.00  33.7  21.4  3.6  18.00  42.0  R
  DGFHL 26B-2D50R  26.0  1.90  2.50  1.60  8.0  110.00  31.5  21.4  3.7  18.00  50.0  R
  DGFHR 26B-2D50L  26.0  1.90  2.50  1.60  8.0  110.00  31.5  21.4  3.7  18.00  50.0  L
  DGFHL 26B-3D50  26.0  3.00  3.18  2.40  8.0  110.00  31.5  21.4  3.7  18.00  30.0  L
  DGFHR 26B-3D50  26.0  3.00  3.18  2.40  8.0  110.00  31.5  21.4  3.7  18.00  30.0  R
  DGFHL 26B-3D50R  26.0  3.00  3.18  2.40  8.0  110.00  31.5  21.4  3.7  18.00  50.0  L
  DGFHR 26B-3D50L  26.0  3.00  3.18  2.40  8.0  110.00  31.5  21.4  3.7  18.00  50.0  R
  DGFHL 32B-2D50  32.0  1.90  2.50  1.60  8.0  120.00  31.5  24.8  -  18.00  42.0  L
  DGFHR 32B-2D50  32.0  1.90  2.50  1.60  8.0  120.00  31.5  24.8  -  18.00  42.0  R
  DGFHL 32B-2D50R  32.0  1.90  2.50  1.60  8.0  120.00  31.5  24.8  -  18.00  50.0  L
  DGFHR 32B-2D50L  32.0  1.90  2.50  1.60  8.0  120.00  31.5  24.8  -  18.00  50.0  R
  DGFHL 32B-3D50  32.0  3.00  3.18  2.40  8.0  120.00  31.5  24.8  -  18.00  42.0  L
  DGFHR 32B-3D50  32.0  3.00  3.18  2.40  8.0  120.00  31.5  24.8  -  18.00  42.0  R
  DGFHL 32B-3D50R  32.0  3.00  3.18  2.40  8.0  120.00  31.5  24.8  -  18.00  50.0  L
  DGFHR 32B-3D50L  32.0  3.00  3.18  2.40  8.0  120.00  31.5  24.8  -  18.00  50.0  R

Insert limit is Tmax=18 mm. If deeper penetration is required, the insert should be modified into single-ended by the user.
DG..1.0 insert can be mounted into pocket sizes 2 and 3. Inthat case the pocket width has to be modified -click on "More Info"
Print  Send by mail  Save to word  Save to Excel