SDN-LN12 :  Full slot, disk type slotting cutters using LNET 12 tangentially mounted inserts. Narrow slots save workpiece material. A very effective solution for parting at high speeds quality parts such as bearing caps.  
 
 
Side slotting   Bottom Shouldering   Slotting  
  Designation
Z
Zeff
D
Da
Tmax
D3		 ap
min6.0-7.0 mm range is available on request		 ap
max12.0-14.6 mm range is available on request
H1
Kg
  SDN D080-07-27-LN12  8  4  80.00  27.00  17.00  41.00  7.00  8.50  12.0  0.78
  SDN D080-10-27-LN12  8  4  80.00  27.00  17.00  41.00  10.00  12.00  12.0  0.21
  SDN D100-07-32-LN12  10  5  100.00  32.00  24.00  47.00  7.00  8.50  12.0  0.51
  SDN D100-10-32-LN12  10  5  100.00  32.00  24.00  47.00  10.00  12.00  12.0  0.50
  SDN D125-07-40-LN12  12  6  125.00  40.00  31.00  55.00  7.00  8.50  14.0  0.49
  SDN D125-10-40-LN12  12  6  125.00  40.00  31.00  55.00  10.00  12.00  14.0  0.61
  SDN D160-10-40-LN12  16  8  160.00  40.00  50.00  55.00  10.00  12.00  14.0  1.10
  SDN D200-08-50-LN12  20  10  200.00  50.00  62.50  70.00  8.00  10.00  12.0  1.75
  SDN D200-10-50-LN12  20  10  200.00  50.00  62.50  69.00  10.00  12.00  14.0  1.90
  SDN D250-08-50-LN12  26  13  250.00  60.00  87.00  84.00  8.00  10.00  12.0  3.07
  SDN D250-08-60-LN12  26  13  250.00  60.00  80.30  84.00  8.00  10.00  12.0  2.22
  SDN D250-10-50-LN12  26  13  250.00  60.00  87.00  84.00  10.00  12.00  14.0  2.13
  SDN D250-10-60-LN12  26  13  250.00  60.00  80.00  84.00  10.00  12.00  14.0  2.83

Each tool is supplied with screws for the thinnest specified insert. Please verify use of the correct screw for the insert being used.
For more than one insert option, slot width depends on the selected insert width.
Gang-Mill Assembly SDN and left-hand SSB cutters feature two keyways. It is recommended to assemble gang-mills with alternating keyway position. This practice reduces vibration.
Print  Send by mail  Save to word  Save to Excel