ISCAR Cutting Tools - Metal Working Tools - Iscar Catalog : DCT (3/8-7/8 UNC/UNF)

Click on the application to view only its related inserts.
(If no application has been selected all related inserts will be displayed)

DCT (3/8-7/8 UNC/UNF) :

Designation	D min	D max	Dnominal	D2	d	L	L1	L4	L5	Po. Size	Th
DCT 079-025-15.87-3/8UNC	0.00	0.00	0.00	0.00	0.00	0.0	0.0	0.0	0.00	0.0	3/8UNC
DCT 084-025-15.87-3/8UNF	0.00	0.00	0.00	0.00	0.00	0.0	0.0	0.0	0.00	0.0	3/8UNF
DCT 092-027-15.87-7/16UNC	0.00	0.00	0.00	0.00	0.00	0.0	0.0	0.0	0.00	0.0	7/16UNC
DCT 099-027-15.87-7/16UNF	0.00	0.00	0.00	0.00	0.00	0.0	0.0	0.0	0.00	0.0	7/16UNF
DCT 107-027-15.87-1/2UNC	0.00	0.00	0.00	0.00	0.00	0.0	0.0	0.0	0.00	0.0	1/2UNC
DCT 115-027-15.87-1/2UNF	0.00	0.00	0.00	0.00	0.00	0.0	0.0	0.0	0.00	0.0	1/2UNF
DCT 123-027-15.87-9/16UNC	0.00	0.00	0.00	0.00	0.00	0.0	0.0	0.0	0.00	0.0	9/16UNC
DCT 131-027-15.87-9/16UNF	0.00	0.00	0.00	0.00	0.00	0.0	0.0	0.0	0.00	0.0	9/16UNF
DCT 135-031-19.05-5/8UNC	0.00	0.00	0.00	0.00	0.00	0.0	0.0	0.0	0.00	0.0	5/8UNC
DCT 147-031-19.05-5/8UNF	0.00	0.00	0.00	0.00	0.00	0.0	0.0	0.0	0.00	0.0	5/8UNF
DCT 167-036-19.05-3/4UNC	0.00	0.00	0.00	0.00	0.00	0.0	0.0	0.0	0.00	0.0	3/4UNC
DCT 175-036-25.4-3/4UNF	0.00	0.00	0.00	0.00	0.00	0.0	0.0	0.0	0.00	0.0	3/4UNF
DCT 194-042-25.4-7/8UNC	0.00	0.00	0.00	0.00	0.00	0.0	0.0	0.0	0.00	0.0	7/8UNC
DCT 206-042-25.4-7/8UNF	0.00	0.00	0.00	0.00	0.00	0.0	0.0	0.0	0.00	0.0	7/8UNF

Hole tolerance: D+.002 in average conditions. However, it can be higher or lower according to machine and tooling conditions.