GHIUR/L-UC :  45° undercutting bars for internal turning of aluminum wheels.  
 Right-hand shown
 
Int. Machining Aluminum Wheels   COOLANT 
  Designation
W
d		 D
min
Tmax-r
l1
l2
f
F1
h1
  GHIUL 40UC-6  6.00  40.00  70.00  0.00For bore diameter D>200, Tmax is 2.0 mm  350.00  75.0  23.8  24.7  18.0
  GHIUR 40UC-6  6.00  40.00  70.00  0.00For bore diameter D>200, Tmax is 2.0 mm  350.00  75.0  23.8  24.7  18.0
  GHIUL 50UC-6  6.00  50.00  78.00  0.00For bore diameter D>200, Tmax is 1.3 mm  350.00  75.0  28.8  29.7  23.0
  GHIUR 50UC-6  6.00  50.00  78.00  0.00For bore diameter D>200, Tmax is 1.3 mm  350.00  75.0  28.8  29.7  23.0
  GHIUL 40UC-8  8.00  40.00  68.00  0.00For bore diameter D>200, Tmax is 2.8 mm  350.00  79.0  28.8  26.0  18.0
  GHIUR 40UC-8  8.00  40.00  68.00  0.00For bore diameter D>200, Tmax is 2.8 mm  350.00  79.0  28.8  26.0  18.0
  GHIUR 50UC-8  8.00  50.00  58.00  0.00For bore diameter D>200, Tmax is 6.0 mm  350.00  80.0  30.2  31.4  23.0

Print  Send by mail  Save to word  Save to Excel