MM FF :  MULTI-MASTER, 2 flute, FEEDMILL, interchangeable solid carbide heads. Used for milling at very high feed and small D.O.C.  
 Economical solution
 
Profiling   Ramp down   Helical interpolation   Slotting   Plunging & recessing  
  Designation
D
Z		 ap
max
rShould be used for programming
Ts
D2
l
a°
Rd°		 fz
(min)		 fz
(max)
  Grade
  MM FF100R1.5-L12-2T06  10.00  2  0.60  2.00  T06  9.60  12.50  10  90.0  0.30  0.60 IC908
  MM FF120R2.0-2T08  12.00  2  1.00  2.50  T08  11.50  11.10  10  90.0  0.50  1.00 IC908 IC903
  MM FF500R08-L59-2T08  12.70  2  1.00  2.00  T08  11.50  15.00  10  90.0  0.50  1.00 IC908
  MM FF160R2.0-L20-2T10  16.00  2  1.10  3.00  T10  15.20  20.00  10  90.0  0.55  1.10 IC908
  MM FF160R2.0-2T10  16.00  2  1.10  3.00  T10  15.20  13.50  10  90.0  0.55  1.10 IC908
  MM FF200R2.0-2T12  20.00  2  1.50  3.30  T12  18.30  17.50  10  90.0  0.75  1.50 IC908

For clamping keys (should be ordered separately), tightening torques and clamping instructions, click on "More Info".
Do not apply lubricant to the threaded connection.
Print  Send by mail  Save to word  Save to Excel