GHIR/L-C (W=4-6.4) :  CUT-GRIP bars with internal coolant holes, used for grooving and turning.  
 Right-hand shown
 
Int. Grooving   Int. Groov & Turn   Int. Profiling   Int. Threading (Grip)   COOLANT 
  Designation
d		 W
min		 W
max		 D
min
Tmax-r
h1
l1
l2
f
A
R/L
  GHIL 25C-510  25.00  4.00  5.30  32.00  10.00  11.5  160.00  25.0  22.5  3.50  L
  GHIR 25C-510  25.00  4.00  5.30  32.00  10.00  11.5  160.00  25.0  22.5  3.50  R
  GHIL 32C-610  32.00  4.80  6.40  43.00  10.00  14.5  200.00  -  26.2  4.40  L
  GHIR 32C-610  32.00  4.80  6.40  43.00  10.00  14.5  200.00  -  26.2  4.40  R
  GHIL 40C-612  40.00  4.80  6.40  53.00  12.00  18.0  250.00  -  32.2  4.40  L
  GHIR 40C-612  40.00  4.80  6.40  53.00  12.00  18.0  250.00  -  32.2  4.40  R

For using TIPI insert, toolholder seat needs to be modified according to insert profile, to ensure clearance.
Print  Send by mail  Save to word  Save to Excel