E93CN :  Toroidal, endmills carrying CNHT...and ENHT...inserts (TORMILL). Used for undercutting, for the finish cut of sculptured surfaces, for steep or vertical walls, thin walls, long and unsupported workpieces and parts with non-rigid clamping.  
 
 
Undercutting   Profiling   Side plunging   Shouldering   Ramp down   Plunging & recessing  
  Designation
DDiameter D according to insert r=1.0. For other insert radii refer to attached table
ap
Z
H
L
Rd°
d
ShankC-Cylindrical
Kg
  E93CN D16-2-L100-C15-07  16.00  5.00  2  20.00  100.00  4.0  15.00  C  0.19
  E93CN D16-2-L110-C16-07  16.00  5.00  2  50.00  110.00  4.0  16.00  C  0.15
  E93CN D20-3-L140-C19-07  20.00  5.00  3  20.00  140.00  3.0  19.00  C  0.36
  E93CN D20-3-L160-C20-07  20.00  5.00  3  75.00  160.00  3.0  20.00  C  0.33
  E93CN D25-4-L160-C24-07  25.00  5.00  4  20.00  160.00  2.0  24.00  C  0.54
  E93CN D25-4-L180-C25-07  25.00  5.00  4  100.00  180.00  2.0  25.00  C  0.67
  E93CN D25-2-L180-C25-10  25.00  8.00  2  100.00  180.00  7.0  25.00  C  0.66
  E93CN D35-3-L200-C32-10  35.00  8.00  3  50.00  200.00  2.0  32.00  C  1.18

For adaptation click on "More Info"
Diameter D according to insert r1.0
Print  Send by mail  Save to word  Save to Excel