GHMPR/L :  CUT-GRIP, perpendicular toolholders for shallow radial and axial grooving. Light turning, small depth of cut (ap=0.1-0.5 mm), and small feed (f=0.1 mm/rev).  
 Right-hand shown
 
Ext. Grooving   Face Grving Along Shaft   Ext. Threading (Grip)  
  Designation W
max
Tmax-r
Tmax-a
h
b
l1
l2
R/L
  GHMPL 16  4.80  4.80  4.80  16.0  16.0  110.00  17.0  L
  GHMPR 16  4.80  4.80  4.80  16.0  16.0  110.00  17.0  R
  GHMPL 20  6.40  4.80  4.80  20.0  20.0  120.00  17.0  L
  GHMPR 20  6.40  4.80  4.80  20.0  20.0  120.00  17.0  R
  GHMPL 25  6.40  4.80  4.80  25.0  25.0  135.00  17.0  L
  GHMPR 25  6.40  4.80  4.80  25.0  25.0  135.00  17.0  R

For insert clamping instructions, click on "More Info".
Print  Send by mail  Save to word  Save to Excel