•  
 ECR-T-M :  Solid carbide, 4 and 6 flute with 20° helix, medium length roughing endmills. Used for high stock removal rates on high temperature alloys (PH). Cutting Conditions Machine Power 
 
 

Helical interpolation   Counter boring   Slotting   Shouldering   Ramp down  
  Designation
D
d
Ap
L
Flut
Ha°
Rd°
Shank
Ch		   Grade
  ECR-T4M 06-10-C06-57  6.00  6.00  10.00  57.00  4  20.0  5.00  C  0.30X45 IC900
  ECR-T4M 06-10-W06-57  6.00  6.00  10.00  57.00  4  20.0  5.00  W  0.30X45 IC900
  ECR-T4M 08-16-C08-63  8.00  8.00  16.00  63.00  4  20.0  5.00  C  0.40X45 IC900
  ECR-T4M 08-16-W08-63  8.00  8.00  16.00  63.00  4  20.0  5.00  W  0.40X45 IC900
  ECR-T4M 10-20-C10-72  10.00  10.00  20.00  72.00  4  20.0  5.00  C  0.40X45 IC900
  ECR-T4M 10-20-W10-72  10.00  10.00  20.00  72.00  4  20.0  5.00  W  0.40X45 IC900
  ECR-T4M 12-24-C12-83  12.00  12.00  24.00  83.00  4  20.0  5.00  C  0.40X45 IC900
  ECR-T4M 12-24-W12-83  12.00  12.00  24.00  83.00  4  20.0  5.00  W  0.40X45 IC900
  ECR-T4M 16-32-C16-92  16.00  16.00  32.00  92.00  4  20.0  5.00  C  0.50X45 IC900
  ECR-T4M 16-32-W16-92  16.00  16.00  32.00  92.00  4  20.0  5.00  W  0.50X45 IC900
  ECR-T4M 20-40-C20-104  20.00  20.00  40.00  104.00  4  20.0  5.00  C  0.50X45 IC900
  ECR-T4M 20-40-W20-104  20.00  20.00  40.00  104.00  4  20.0  5.00  W  0.50X45 IC900

Print  Send by mail  Save to word