ECR-T-M :  4 flute, 20° helix medium length Solid carbide roughing endmills. Used for high stock removal rates on high temperature alloys (PH).  
 
 
Shouldering   Slotting   Ramp down   Helical interpolation   Counter boring  
  Designation
D
d
ap
L
Flute
Ha°
Rd°
ShankC-Cylindrical, W-Weldon
Ch		 fz
(min)		 fz
(max)
  Grade
  ECR-T4M 06-10-C06-57  6.00  6.00  10.00  57.00  4  20.0  5.0  C  0.30  0.03  0.06 IC900
  ECR-T4M 06-10-W06-57  6.00  6.00  10.00  57.00  4  20.0  5.0  W  0.30  0.03  0.06 IC900
  ECR-T4M 08-16-C08-63  8.00  8.00  16.00  63.00  4  20.0  5.0  C  0.40  0.03  0.08 IC900
  ECR-T4M 08-16-W08-63  8.00  8.00  16.00  63.00  4  20.0  5.0  W  0.40  0.03  0.08 IC900
  ECR-T4M 10-20-C10-72  10.00  10.00  20.00  72.00  4  20.0  5.0  C  0.40  0.03  0.09 IC900
  ECR-T4M 10-20-W10-72  10.00  10.00  20.00  72.00  4  20.0  5.0  W  0.40  0.03  0.09 IC900
  ECR-T4M 12-24-C12-83  12.00  12.00  24.00  83.00  4  20.0  5.0  C  0.40  0.04  0.10 IC900
  ECR-T4M 12-24-W12-83  12.00  12.00  24.00  83.00  4  20.0  5.0  W  0.40  0.04  0.10 IC900
  ECR-T4M 16-32-C16-92  16.00  16.00  32.00  92.00  4  20.0  5.0  C  0.50  0.05  0.11 IC900
  ECR-T4M 16-32-W16-92  16.00  16.00  32.00  92.00  4  20.0  5.0  W  0.50  0.05  0.11 IC900
  ECR-T4M 20-40-C20-104  20.00  20.00  40.00  104.00  4  20.0  5.0  C  0.50  0.05  0.11 IC900
  ECR-T4M 20-40-W20-104  20.00  20.00  40.00  104.00  4  20.0  5.0  W  0.50  0.05  0.11 IC900

Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer