CGFG 51-P8 :  Blades for face machining, carrying 8 mm inserts, Dmin 180.  
 Right-hand shown
 Left-hand shown
Face Grooving & Turning   Face Grooving   Face Grving Along Shaft  
  Designation
W		 D1
minMinimum penetration diameter		 D1
maxMaximum penetration diameter
Tmax-a
B1
h1
l1
H2
A2
R/L
  CGFG 51-180L-P8  8.00  180.0  240.0  70.00  52.6  45.0  200.00  60.0  27.5  L
  CGFG 51-180R-P8  8.00  180.0  240.0  70.00  52.6  45.0  200.00  60.0  27.5  R
  CGFG 51-240L-P8  8.00  240.0  320.0  80.00  52.6  45.0  210.00  70.0  26.0  L
  CGFG 51-240R-P8  8.00  240.0  320.0  80.00  52.6  45.0  210.00  70.0  26.0  R
  CGFG 51-320L-P8  8.00  320.0  440.0  90.00  52.6  45.0  220.00  80.0  24.5  L
  CGFG 51-320R-P8  8.00  320.0  440.0  90.00  52.6  45.0  220.00  80.0  24.5  R
  CGFG 51-440L-P8  8.00  440.0  700.0  100.00  52.6  45.0  230.00  90.0  22.5  L
  CGFG 51-440R-P8  8.00  440.0  700.0  100.00  52.6  45.0  230.00  90.0  22.5  R
  CGFG 51-700L-P8  8.00  700.0  1,500.0  120.00  52.6  45.0  250.00  100.0  20.0  L
  CGFG 51-700R-P8  8.00  700.0  1,500.0  120.00  52.6  45.0  250.00  100.0  20.0  R

For insert clamping instructions, click on "More Info".
Print  Send by mail  Save to word  Save to Excel