HP F90AT-19 :  HELIPLUS, 90° face mills with HP AD.. 1906... long edged inserts.  
 
 
Facing   Shouldering   Slotting   Ramp down   Counter boring   COOLANT 
  Designation
D
Z
ap
L
Da
Rd°
ArborFor adaptation click on More Info
Kg
  HP F90AT D50-3-22-19  50.00  3  18.00  50.00  22.00  5.0  A  0.50
  HP F90AT D50-4-22-19  50.00  4  18.00  50.00  22.00  5.0  A  0.33
  HP F90AT D63-4-25.4-19  63.00  4  18.00  50.00  25.40  3.5  A  0.77
  HP F90AT D63-5-25.4-19  63.00  5  18.00  50.00  25.40  3.5  A  0.72
  HP F90AT D63-5-27-19  63.00  5  18.00  50.00  27.00  3.5  A  0.76
  HP F90AT D80-4-25.4-19  80.00  4  18.00  50.00  25.40  2.5  B  1.01
  HP F90AT D80-6-25.4-19  80.00  6  18.00  50.00  25.40  2.5  B  0.72
  HP F90AT D80-6-27-19  80.00  6  18.00  50.00  27.00  2.5  B  0.72
  HP F90AT D100-5-31.75-19  100.00  5  18.00  50.00  31.75  2.0  B  1.74
  HP F90AT D100-5-32-19  100.00  5  18.00  50.00  32.00  2.0  B  1.68
  HP F90AT D100-7-31.75-19  100.00  7  18.00  50.00  31.75  2.0  B  0.72
  HP F90AT D100-7-32-19  100.00  7  18.00  50.00  32.00  2.0  B  1.60

Insert clamping/unclamping procedure: First loosely attach the rear clamping screw, then the face screw. In the same order, tighten them both.
Print  Send by mail  Save to word  Save to Excel