HSK A-MAXIN-BIN (BALANCIN) :  MAXIN balanceable power chucks with HSK DIN69893 form A taper shanks.  
 
 
RUNOUT (INTERNAL) 0.003  HARDNESS 58-60  SURFACE FINISH N5  COOLANT 
  Designation
SS
d2Without a collet		 d
minBy using a reducing collet
D3
D1
L
L1
L3		 L
min		 L
max
Kg
  HSK A 63 MAXIN 20X 95BIN  63  20.00  6.0  51.00  61.0  95.00  69.0  17.50  56.0  66.0  1.00
  HSK A 63 MAXIN 32X113BIN  63  32.00  6.0  69.00  80.0  113.00  87.0  24.90  70.0  85.0  1.32
  HSK A 100 MAXIN 20X115BIN  100  20.00  6.0  51.00  61.0  115.00  86.0  17.50  56.0  69.0  2.63
  HSK A 100 MAXIN 32X110BIN  100  32.00  6.0  69.00  80.0  110.00  81.0  24.90  70.0  78.0  2.75

A cooling tube must be used with all coolant through HSK spindles (should be ordered separately).
Use of dmax diameter tools provide best performance as collets reduce gripping force by 25%
First clamp the tool inside the chuck and then improve the system's balance by adjusting the balancing rings
Print  Send by mail  Save to word  Save to Excel