DGFHL-26B-TR-D :  Double- and single-ended, parting and grooving reinforced blades for double-ended DGN inserts. For Traub and Index machines.  
 
 
Parting   Ext. Grooving  
  Designation
B1Mounted on all ISCAR standard blocks.		 W
min		 W
max
A
A2
l1
H2
h1		 D
maxThe specified limit refers to the tool.
  DGFHL 26B-1.5TR-D20  26.0  1.00  1.50  1.20  7.9  110.00  27.9  21.4  20.0
  DGFHL 26B-2TR-D36  26.0  1.90For DG: 1.0 insert - modify holder.  2.50  1.60  7.9  110.00  27.9  21.4  36.0
  DGFHL 26B-2TR-D36R  26.0  1.90For DG: 1.0 insert - modify holder.  2.50  1.60  7.9  110.00  27.9  21.4  36.0
  DGFHL 26B-3TR-D36  26.0  3.00For DG: 1.0 insert - modify holder.  3.18  2.40  7.9  110.00  27.9  21.4  36.0
  DGFHL 26B-3TR-D36R  26.0  3.00For DG: 1.0 insert - modify holder.  3.18  2.40  7.9  110.00  27.9  21.4  36.0

Insert limit is Tmax=18 mm. If deeper penetration is required, the insert should be modified into single-ended by the user.
DG..1.0 insert can be mounted into pocket sizes 2 and 3. In that case the pocket width has to be modified-click on "Moro Info"
Print  Send by mail  Save to word  Save to Excel