T490 ELN-13 :  90° endmills using T490 LNMT/LNHT 13... tangentially clamped inserts with 4 helical, 13 mm long cutting edges (HELITANG T490 Line).  
 
 
Shouldering   Slotting   Ramp down     COOLANT 
  Designation
D
Z
L
H
L1
ap
d
ShankC-Cylindrical, W-Weldon
Rd°Only when T490 LNHT 1306 PNTR-RD insert is used
Kg
  T490 ELN D25-2-C25-13  25.00  2  120.00  35.00  33.0  12.50  25.00  C  -  0.40
  T490 ELN D25-2-W25-13  25.00  2  95.00  35.00  33.0  12.50  25.00  W  -  0.30
  T490 ELN D32-3-C32-13  32.00  3  130.00  40.00  38.0  12.50  32.00  C  2.8  0.72
  T490 ELN D32-3-C32-13B  32.00  3  250.00  50.00  48.0  12.50  32.00  C  2.8  1.44
  T490 ELN D32-3-W32-13  32.00  3  110.00  40.00  38.0  12.50  32.00  W  2.8  0.59
  T490 ELN D40-3-C40-13B  40.00  3  250.00  50.00  48.0  12.50  40.00  C  2.0  2.25
  T490 ELN D40-4-C32-13  40.00  4  130.00  40.00  -  12.50  32.00  C  2.0  0.81
  T490 ELN D40-4-W32-13  40.00  4  115.00  40.00  -  12.50  32.00  W  2.0  0.72
  T490 ELN D50-4-C32-13  50.00  4  130.00  36.50  -  12.50  32.00  C  1.5  0.96
  T490 ELN D50-5-C32-13  50.00  5  130.00  36.50  -  12.50  32.00  C  1.5  0.96

"B" suffix for long cylindrical shank which may be shortened.
For adaptation click on "More Info".
For T490 LNAR-13 on diameter 25mm at ap=5, fz=0.15 at ap=10, fz=0.1
Print  Send by mail  Save to word  Save to Excel