DR-5D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 5xD

SXCIB
Broaching Holders for Lathe and Milling Machines

A-PWLNR/L-X
Lever Lock Boring Bars for Negative WNMX Trigon Inserts

A-SVUNR/L
Boring Bars with Internal Coolant Holes for 35° Negative Rhombic Inserts

A/S-MWLNR/L-W
Top Wedge Lock Boring Bars for Double-Sided Trigon Inserts

A/S-PDUNR/L
Lever Lock Boring Bars for 55° Negative Rhombic Inserts

A/S-PQLNR/L
Lever Lock Boring Bars for Negative Square Inserts with 80° Corners

A/S-SVQCR/L
Screw Lock Boring Bars for 35° Rhombic Inserts with 7° Clearance

DCM-3D (7.5-25.9 mm)
Indexable Head Drills, Drilling Depth 3xD

DCM-5D (7.5-25.9 mm)
Indexable Head Drills, Drilling Depth 5xD

DCM-8D (10-25.9 mm)
Indexable Head Drills, Drilling Depth 8xD

DCN A-1.5D
Indexable Head Drills with Coolant Holes and Weldon Shanks, Drilling Depth 1.5xD

DCN A-3D
Indexable Head Drills with Coolant Holes and Weldon Shanks, Drilling Depth 3xD

DCN A-5D
Indexable Head Drills with Coolant Holes and Weldon Shanks, Drilling Depth 5xD

DCN A-8D
Indexable Head Drills with Coolant Holes and Weldon Shanks, Drilling Depth 8xD

DCT (M8-M24)
Indexable Head Drills with Chamfering Insert, Mainly for Pre-Thread Holes

DR-2D-N (12-60 mm 2xD)
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD

DR-3D-N (12-38 mm 3xD)
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD

DR-4D-N (12-60 mm 4xD)
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD

DR-MF-2.25D
Multifunction Drilling, Boring, Facing and External Turning Tool

DSM-1.5D (10.0-19.9mm 1.5xD)
Indexable Head Drills with Coolant Holes, Drilling Depth 1.5xD

DSM-3D (10.0-19.9 mm 3xD)
Indexable Head Drills with Coolant Holes, Drilling Depth 3xD

DSM-5D (10.0-19.9 mm 5xD)
Indexable Head Drills with Coolant Holes, Drilling Depth 5xD

E/S-SCLCR/L
Screw Lock Boring Bars for 80° Rhombic Inserts with 7° Clearance

E/S-SDUCR/L
Screw Lock Boring Bars for 55° Rhombic Inserts with 7° Clearance

GHIR/L (W=1.9-6.4)
Internal Grooving and Turning Bars

GHIR/L-C (W=4-6.4)
Grooving and Turning Bars with Internal Coolant Holes

GHIUR/L
Undercutting and Turning Boring Bars

HELIIR/L
Grooving and Turning Bars with Coolant Holes for HELI-GRIP Utility Inserts

S-CSKPR/L
Clamp Lock Boring Bars for 11° Clearance Square Inserts

S-CTFPR/L
Clamp Lock Boring Bars for 11° Clearance Triangular Inserts

S-DCLNR/L
R-Clamp Boring Bars for 80° Negative Diamond Inserts

S-DWLNR/L
R-Clamp Boring Bars for Negative Trigon Inserts

S-MTLCR/L-W
Wedge Lock Boring Bars for 7° Clearance Triangular Inserts

S-MTLNR/L-W
Wedge Lock Boring Bars for Negative Triangular Inserts

S-MULNR/L-MW
MULTI-WEDGE Lock Boring Bars for 80° Negative Rhombic, Trigon and Square Inserts

S-PQFNR/L
Lever Lock Boring Bars for Negative Square Inserts with 80° Corners, used for Internal Facing

S-PTFNR/L
91° Lead Angle Lever Lock Boring Bars for Negative Triangular Inserts

S-SLANR-TANG
Boring Bars for LNMX Tangentially Screw Clamped Insert with 4 Cutting Edges for High Metal Removal Rates

S-SUXCR/L-CM
Screw Lock Boring Bars for Four Different 7° Clearance Geometries

S/A-PCLNR/L
Lever Lock Boring Bars for Negative 80° Rhombic Inserts

S/A-SQLCR/L
Screw Lock Boring Bars for 80° Square Inserts with 7° Clearance

SIR/L
Internal Threading Bars

TGIR/L-C
Grooving and Turning Bars with Coolant Holes for TOP-GRIP Utility Inserts