HFAIR/L-DG :  Adapters for internal face grooving and turning, Dmin 55 mm.  
 Right-hand shown
 
Face Grooving Face Grooving & Turning Int. Face Grooving Int. Face Recessing COOLANT
  Designation
W		 D1
minMinimum penetration diameter		 D1
maxMaximum penetration diameter
Tmax-a
f1
l2
l1
R/L
  HFAIL 75C-4T30DG  4.00  75.0  140.0  30.00  10.9  34.5  68.50  L
  HFAIR 75C-4T30DG  4.00  75.0  140.0  30.00  10.9  34.5  68.50  R
  HFAIL 140C-4T30DG  4.00  140.0  -  30.00  10.9  34.5  68.50  L
  HFAIR 140C-4T30DG  4.00  140.0  -  30.00  10.9  34.5  68.50  R
  HFAIL 55C-5T25DG  5.00  55.0  70.0  25.00  11.9  32.0  66.00  L
  HFAIR 55C-5T25DG  5.00  55.0  70.0  25.00  11.9  32.0  66.00  R
  HFAIL 70C-5T25DG  5.00  70.0  95.0  25.00  11.9  32.0  66.00  L
  HFAIR 70C-5T25DG  5.00  70.0  95.0  25.00  11.9  32.0  66.00  R
  HFAIL 95C-5T35DG  5.00  95.0  130.0  35.00  11.9  39.5  73.50  L
  HFAIR 95C-5T35DG  5.00  95.0  130.0  35.00  11.9  39.5  73.50  R
  HFAIL 130C-5T38DG  5.00  130.0  180.0  38.00  11.9  42.5  76.50  L
  HFAIR 130C-5T38DG  5.00  130.0  180.0  38.00  11.9  42.5  76.50  R
  HFAIL 180C-5T38DG  5.00  180.0  -  38.00  11.9  42.5  76.50  L
  HFAIR 180C-5T38DG  5.00  180.0  -  38.00  11.9  42.5  76.50  R
  HFAIL 70C-6T28DG  6.00  70.0  100.0  28.00  12.0  35.0  69.00  L
  HFAIR 70C-6T28DG  6.00  70.0  100.0  28.00  12.0  35.0  69.00  R
  HFAIL 100C-6T32DG  6.00  100.0  180.0  32.00  12.0  39.0  73.00  L
  HFAIR 100C-6T32DG  6.00  100.0  180.0  32.00  12.0  39.0  73.00  R
  HFAIL 180C-6T38DG  6.00  180.0  400.0  38.00  12.4  42.5  76.50  L
  HFAIR 180C-6T38DG  6.00  180.0  -  38.00  12.4  42.5  76.50  R

Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer