PICCO-MF :  Multifunction, solid carbide tools, for drilling, facing, int. and ext. turning on Swiss and small CNC machines. Part of the PASSPORT system.  
 Right-hand shown
 
Drilling Ext Face Int. Turning
  Designation
D
L
L2
d
R
R/L
  Grade
  PICCO R-MF 6-3 L06  3.00  6.0  28.0  6.00  0.10  R IC908
  PICCO L-MF 6-4 L08  4.00  8.0  30.0  6.00  0.10  L IC908
  PICCO R-MF 6-4 L08  4.00  8.0  30.0  6.00  0.10  R IC908
  PICCO L-MF 6-4 L12  4.00  12.0  34.0  6.00  0.20  L IC908
  PICCO R-MF 6-4 L12  4.00  12.0  34.0  6.00  0.20  R IC908
  PICCO L-MF 6-5 L10  5.00  10.0  32.0  6.00  0.10  L IC908
  PICCO R-MF 6-5 L10  5.00  10.0  32.0  6.00  0.10  R IC908
  PICCO L-MF 6-5 L15  5.00  15.0  41.0  6.00  0.30  L IC908
  PICCO R-MF 6-5 L15  5.00  15.0  41.0  6.00  0.30  R IC908
  PICCO L-MF 6-6 L12  6.00  12.0  34.0  6.00  0.10  L IC908
  PICCO R-MF 6-6 L12  6.00  12.0  34.0  6.00  0.10  R IC908
  PICCO L-MF 6-6 L18  6.00  18.0  43.0  6.00  0.30  L IC908
  PICCO R-MF 6-6 L18  6.00  18.0  43.0  6.00  0.30  R IC908
  PICCO L-MF 8-7 L14  7.00  14.0  41.0  8.00  0.10  L IC908
  PICCO R-MF 8-7 L14  7.00  14.0  41.0  8.00  0.10  R IC908
  PICCO L-MF 8-7 L21  7.00  21.0  55.0  8.00  0.30  L IC908
  PICCO R-MF 8-7 L21  7.00  21.0  55.0  8.00  0.30  R IC908
  PICCO L-MF 8-8 L16  8.00  16.0  43.0  8.00  0.10  L IC908
  PICCO R-MF 8-8 L16  8.00  16.0  43.0  8.00  0.10  R IC908
  PICCO L-MF 8-8 L24  8.00  24.0  58.5  8.00  0.30  L IC908
  PICCO R-MF 8-8 L24  8.00  24.0  58.5  8.00  0.30  R IC908

Dmin can be 0.1 mm smaller by shifting tool center
Applications: Drilling; face turning; internal chamfering; internal turning\ boring; internal profiling; external chamfering; external turning.
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer