RM-SHR-H7N-CS :  Solid carbide reamers with a cylindrical shank, spiral flute - DIN 8093. C - solid carbide. CH - brazed solid carbide head with DIN 1809 tang.  
 
 
Stacked plates Through & axial groove Through & perpendicular holes Through & radial groove Through hole COOLANT
  Designation
Dr
L3
L1
L2
Flute
d
  Grade
  RM-SHR-0300-H7N-CS-C  3.000  15.0  30.0  61.0  6  3.00 IC07
  RM-SHR-0320-H7N-CS-C  3.200  18.0  33.0  70.0  6  3.20 IC07
  RM-SHR-0350-H7N-CS-C  3.500  18.0  33.0  70.0  6  3.50 IC07
  RM-SHR-0400-H7N-CS-C  4.000  19.0  44.0  75.0  6  4.00 IC07
  RM-SHR-0450-H7N-CS-C  4.500  21.0  46.0  80.0  6  4.50 IC07
  RM-SHR-0500-H7N-CS-C  5.000  23.0  53.0  86.0  6  5.00 IC07
  RM-SHR-0550-H7N-CS-C  5.500  26.0  56.0  93.0  6  5.60 IC07
  RM-SHR-0600-H7N-CS-C  6.000  26.0  56.0  93.0  6  5.60 IC07
  RM-SHR-0650-H7N-CS-C  6.500  28.0  63.0  101.0  6  6.30 IC07
  RM-SHR-0700-H7N-CS-C  7.000  31.0  69.0  109.0  6  7.10 IC07
  RM-SHR-0750-H7N-CS-C  7.500  31.0  69.0  109.0  6  7.10 IC07
  RM-SHR-0800-H7N-CS-C  8.000  33.0  75.0  117.0  6  8.00 IC07
  RM-SHR-0850-H7N-CS-CH  8.500  33.0  75.0  117.0  6  8.00 IC07
  RM-SHR-0900-H7N-CS-CH  9.000  36.0  81.0  125.0  6  9.00 IC07
  RM-SHR-0950-H7N-CS-CH  9.500  36.0  81.0  125.0  6  9.00 IC07
  RM-SHR-1000-H7N-CS-CH  10.000  38.0  87.0  133.0  6  10.00 IC07
  RM-SHR-1050-H7N-CS-CH  10.500  38.0  87.0  133.0  6  10.00 IC07
  RM-SHR-1100-H7N-CS-CH  11.000  41.0  96.0  142.0  6  10.00 IC07
  RM-SHR-1200-H7N-CS-CH  12.000  44.0  105.0  151.0  6  10.00 IC07
  RM-SHR-1300-H7N-CS-CH  13.000  44.0  105.0  151.0  6  10.00 IC07
  RM-SHR-1400-H7N-CS-CH  14.000  47.0  110.0  160.0  8  12.50 IC07
  RM-SHR-1500-H7N-CS-CH  15.000  50.0  112.0  162.0  8  12.50 IC07
  RM-SHR-1600-H7N-CS-CH  16.000  52.0  120.0  170.0  8  12.50 IC07

-C: Solid carbide
-CH: Brazed solid carbide head with DIN 1809 tang
Hole tolerance: H7 manufacturing tolerance according to DIN 1420
Reamers above 5 mm diameter have the tang back-end design
Available grades: IC07 (uncoated), optional: IC907 (TiAlN PVD coated)
Special diameters are available on request
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer