F86LNX-11 :  86° face mills carrying all 8 cutting edges of LN..1106... tangentially clamped inserts.  
 
 
Facing Shouldering
  Designation
D
Z
L
Da
ArborFor adaptation click on More Info
  F86LNX D050-06-22-R-N11  50.00  6  40.00  22.00  A
  F86LNX D063-06-22-R-N11  63.00  6  40.00  22.00  A
  F86LNX D063-08-22-R-N11  63.00  8  40.00  22.00  A
  F86LNX D080-08-27-R-N11  80.00  8  50.00  27.00  B
  F86LNX D080-10-27-R-N11  80.00  10  50.00  27.00  B
  F86LNX D100-08-32-R-N11  100.00  8  50.00  32.00  B
  F86LNX D100-12-32-R-N11  100.00  12  50.00  32.00  B
  F86LNX D125-10-40-R-N11  125.00  10  63.00  40.00  B
  F86LNX D125-16-40-R-N11  125.00  16  63.00  40.00  B

For ap>3.0 mm, zeff is half the number indicated in the table
LNAR 1106 inserts should not be used on these cutters
F86LNX cutters enable using all 8 cutting edges of the LNKX/LNMT 1106.. inserts- 4 R.H. in the peripheral position and 4 L.H. in the frontal position
Feed should be limited to 0.25 mm/tooth.
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer