DST-E1 :  Deep single tube counterboer with through hole, external 4 start thread connection and 1-brazed tip. Each item represents a diameter range. For a specific head diameter, an order form should be filled out.  
 NOM 0 refers to non-coated drill head, NOM 2 refers to coated drill head.
 
DEEPDRILL Drilling COOLANT
  Designation D
min		 D
max
a°
Ew1
L
d2
TsTube designation
  DST-E1 18.91-20.00 NOM 0  18.91  20.00  20/45  1.0  57.00  15.50  TS-I3
  DST-E1 18.91-20.00 NOM 2  18.91  20.00  20/45  1.0  57.00  15.50  TS-I3
  DST-E1 20.01-21.80 NOM 0  20.01  21.80  20/45  2.0  65.00  16.00  TS-I4
  DST-E1 20.01-21.80 NOM 2  20.01  21.80  20/45  2.0  65.00  16.00  TS-I4
  DST-E1 21.81-24.10 NOM 0  21.81  24.10  20/45  2.0  65.00  18.00  TS-I5
  DST-E1 21.81-24.10 NOM 2  21.81  24.10  20/45  2.0  65.00  18.00  TS-I5
  DST-E1 24.11-26.40 NOM 0  24.11  26.40  20/45  2.0  65.00  19.50  TS-I6
  DST-E1 24.11-26.40 NOM 2  24.11  26.40  20/45  2.0  65.00  19.50  TS-I6
  DST-E1 26.41-28.70 NOM 0  26.41  28.70  20/45  2.0  65.00  21.00  TS-I7
  DST-E1 26.41-28.70 NOM 2  26.41  28.70  20/45  2.0  65.00  21.00  TS-I7
  DST-E1 28.71-31.00 NOM 0  28.71  31.00  20/45  2.0  70.00  23.50  TS-I8
  DST-E1 28.71-31.00 NOM 2  28.71  31.00  20/45  2.0  70.00  23.50  TS-I8
  DST-E1 31.01-33.30 NOM 0  31.01  33.30  20/45  3.0  70.00  25.50  TS-I9
  DST-E1 31.01-33.30 NOM 2  31.01  33.30  20/45  3.0  70.00  25.50  TS-I9
  DST-E1 33.31-36.20 NOM 0  33.31  36.20  20/45  3.0  70.00  28.00  TS-I10
  DST-E1 33.31-36.20 NOM 2  33.31  36.20  20/45  3.0  70.00  28.00  TS-I10
  DST-E1 36.21-39.60 NOM 0  36.21  39.60  20/45  3.0  82.00  30.00  TS-I11
  DST-E1 36.21-39.60 NOM 2  36.21  39.60  20/45  3.0  82.00  30.00  TS-I11
  DST-E1 39.61-43.00 NOM 0  39.61  43.00  20/45  3.0  82.00  33.00  TS-I12
  DST-E1 39.61-43.00 NOM 2  39.61  43.00  20/45  3.0  82.00  33.00  TS-I12
  DST-E1 43.01-47.00 NOM 0  43.01  47.00  20/45  3.0  82.00  36.00  TS-I13
  DST-E1 43.01-47.00 NOM 2  43.01  47.00  20/45  3.0  82.00  36.00  TS-I13
  DST-E1 47.01-51.70 NOM 0  47.01  51.70  20/45  3.0  82.00  39.00  TS-I14
  DST-E1 47.01-51.70 NOM 2  47.01  51.70  20/45  3.0  82.00  39.00  TS-I14
  DST-E1 51.71-56.20 NOM 0  51.71  56.20  20/45  3.0  93.00  43.00  TS-I15
  DST-E1 51.71-56.20 NOM 2  51.71  56.20  20/45  3.0  93.00  43.00  TS-I15
  DST-E1 56.21-60.60 NOM 0  56.21  60.60  20/45  3.0  93.00  47.00  TS-I16
  DST-E1 56.21-60.60 NOM 2  56.21  60.60  20/45  3.0  93.00  47.00  TS-I16
  DST-E1 60.61-65.00 NOM 0  60.61  65.00  20/45  3.0  93.00  51.00  TS-I17
  DST-E1 60.61-65.00 NOM 2  60.61  65.00  20/45  3.0  93.00  51.00  TS-I17

The drill tip is supplied in a grade that is suitable to machine the material group which is indicated in the drill head designation: P-Steel M-Stainless Steel K-Cast Iron.
For quotation form and user guide click on "More Info".
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer