HM90 F90A-15 :  HELI2000, 90° face mills with HM90 ADKT 1505... inserts.  
 
 
Facing Shouldering Slotting Ramp down Counter boring
Related insert for : HM90 F90A D125-9-40

HELIMILL flat rake inserts with a variety of corner radii, used for profiling and for specific corner dimensions. ADCA 1503..R
HELIMILL flat rake inserts with a variety of corner radii, used for profiling and for specific corner dimensions.

Super Positive Precision Inserts, for Aluminum, Stainless Steel and High Temperature Alloys ADCR 1505PDFR
Super Positive Precision Inserts, for Aluminum, Stainless Steel and High Temperature Alloys

Peripherally Ground Inserts, for Finishing and General Use Applications ADCT 1505PDFR-HM
Peripherally Ground Inserts, for Finishing and General Use Applications

Super Positive Inserts, for Machining Aluminum, Stainless Steel and High Temperature Alloys ADKR 1505PD-R/L-HM
Super Positive Inserts, for Machining Aluminum, Stainless Steel and High Temperature Alloys

Inserts with 2 Helical Cutting Edges and Various Corner Radii for General Use ADKT 1505..R/L-HM
Inserts with 2 Helical Cutting Edges and Various Corner Radii for General Use

Inserts with 2 Helical Cutting Edges, for General Use ADKT 1505PDR/L-HM
Inserts with 2 Helical Cutting Edges, for General Use

Insert with 2 Helical Cutting Edges with Ribs Along Edge, for Interrupted Cut ADKT 1505PDTR-76
Insert with 2 Helical Cutting Edges with Ribs Along Edge, for Interrupted Cut

HELIMILL flat rake, general use milling insert. ADMA 150308
HELIMILL flat rake, general use milling insert.

HELIMILL general use milling insert. ADMM 150308-88
HELIMILL general use milling insert.

HELIMILL general use milling insert. ADMT 1503PD-R-HM
HELIMILL general use milling insert.

Inserts with a Serrated Cutting Edge for Chip Splitting, for Roughing ADMT 1505PDR-HS
Inserts with a Serrated Cutting Edge for Chip Splitting, for Roughing

General Use Inserts with 2 Helical Cutting Edges, for High 90° Shoulder Accuracy HM90 ADCT 1505
General Use Inserts with 2 Helical Cutting Edges, for High 90° Shoulder Accuracy

Insert with Reinforced Helical Cutting Edge, for Interrupted Cut and Heavy Milling ADKT 1505PDTR-8M
Insert with Reinforced Helical Cutting Edge, for Interrupted Cut and Heavy Milling

General Use Inserts with 2 Helical Cutting Edges HM90 ADKT 1505**-PDR
General Use Inserts with 2 Helical Cutting Edges

Peripherally Ground Insert with a Super Positive Polished Rake, for Machining Aluminum and High Temperature Alloys HM90 ADCR 1505PDFR-P
Peripherally Ground Insert with a Super Positive Polished Rake, for Machining Aluminum and High Temperature Alloys

Milling Inserts for Unfavorable Conditions and Heavy Interrupted Cut on Hardened Steel HM90 ADKW 1505PDR
Milling Inserts for Unfavorable Conditions and Heavy Interrupted Cut on Hardened Steel

Single Corner R.H. PCD Tipped Inserts, for Milling Aluminum ADKW (PCD)
Single Corner R.H. PCD Tipped Inserts, for Milling Aluminum

Single Corner R.H. Inserts with an IB85 PCBN Brazed Tip, for Machining Hard Materials ADKW (CBN)
Single Corner R.H. Inserts with an IB85 PCBN Brazed Tip, for Machining Hard Materials

Inserts with 2 Different Cutting Edge Configurations, Designed for Chatter Dampening HM90 ADCT 1505PDR-CF
Inserts with 2 Different Cutting Edge Configurations, Designed for Chatter Dampening




Terms of Use and Legal Disclaimer