SLANR/L-TANG :  Screw clamped toolholders for LNMX tangentially clamped inserts. Recommended for heavy longitudinal and face turning.  
 Right-hand shown
 
Ext. tangential 93° approach
Related insert for : SLANR 2525M-15 TANG

Tangential Insert with 4 Cutting Edges and a Positive Rake Angle for High Metal Removal Rates LNMX-HT
Tangential Insert with 4 Cutting Edges and a Positive Rake Angle for High Metal Removal Rates

Tangentially Clamped Insert with a Wiper Corner Design for High Production Cutting and Excellent Surface Finish LNMX-WG
Tangentially Clamped Insert with a Wiper Corner Design for High Production Cutting and Excellent Surface Finish

Tangential Insert with a Positive Rake Angle for High Metal Removal on Soft and Ductile Materials LNMX-HM
Tangential Insert with a Positive Rake Angle for High Metal Removal on Soft and Ductile Materials




Terms of Use and Legal Disclaimer