ER-SEAL :  ER COOLIT, sealed collets with cooling jets for up to 100 bar. The Hard Touch coating increases wear resistance, improves corrosion protection, prolongs the surface finish quality and maintains longer run out accuracy.  
 
 
CONCENTRICITY .0004 HARDNESS 46-48 100 BAR (1450 PSI) MAX. SURFACE FINISH N5
Related solid for : ER40 SEAL 8- 9

Solid Carbide Roughing Endmills with Chip Splitting Cutting Edges, Variable Pitch and Large Radius Frontal Edge EFP-E4,5CF
Solid Carbide Roughing Endmills with Chip Splitting Cutting Edges, Variable Pitch and Large Radius Frontal Edge

2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills EC-A-2
2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills

2 Flute, 30° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners ECC-A-2
2 Flute, 30° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners

4 & 6 Flute, 45° Helix Long Solid Carbide Endmills ECL-B-4/6
4 & 6 Flute, 45° Helix Long Solid Carbide Endmills

3 Flute, 38° Helix Medium Length Solid Carbide Endmills EC-E-3
3 Flute, 38° Helix Medium Length Solid Carbide Endmills

4 Flute, 30° Helix Medium Length Solid Carbide Endmills EC-A-4
4 Flute, 30° Helix Medium Length Solid Carbide Endmills

3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills EC-B-3
3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills

4 Flute, 45° Helix Medium Length Solid Carbide Endmills EC-B-4
4 Flute, 45° Helix Medium Length Solid Carbide Endmills

3 Flute, 38° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners ECC-E-3
3 Flute, 38° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners

4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Chamfered Corners ECC-A-4
4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Chamfered Corners

6 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc ECH-B-6
6 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc

2 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum ECA-B-2
2 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum

3, 4, 6 Flute, 30° and 38° Helix, (3xD) Solid Carbide Roughing Endmills with Relieved Neck for Alloy and Stainless Steel ERF-A/E-3,4,6
3, 4, 6 Flute, 30° and 38° Helix, (3xD) Solid Carbide Roughing Endmills with Relieved Neck for Alloy and Stainless Steel

3 Flute, 38° Helix Medium Length (3xD) Solid Carbide Roughing Endmills with Relieved Necks, for Machining Aluminum ERC-E-3
3 Flute, 38° Helix Medium Length (3xD) Solid Carbide Roughing Endmills with Relieved Necks, for Machining Aluminum

3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills with Various Radii EC-B-3R
3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills with Various Radii

4 Flute, 45° Helix Medium Length Solid Carbide Endmills with Various Radii EC-B-4R
4 Flute, 45° Helix Medium Length Solid Carbide Endmills with Various Radii

2 Flute, 55° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-F-2
2 Flute, 55° Helix Medium Length Solid Carbide Endmills for Machining Aluminum

6 Flute, 50° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc EC-D6
6 Flute, 50° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc

4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Various Radii EC-A-4R
4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Various Radii

4-7 Flute, 45° Helix Short Length (1xD) Solid Carbide Roughing Endmills ECR-B-S
4-7 Flute, 45° Helix Short Length (1xD) Solid Carbide Roughing Endmills

4-7 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks ECR-B-L
4-7 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks

4-7 Flute, 45° Helix Medium Length (2xD) Solid Carbide Roughing Endmills ECR-B-M/ECR-B-M...R
4-7 Flute, 45° Helix Medium Length (2xD) Solid Carbide Roughing Endmills

4-5 Flute, 45° Helix Solid Carbide Roughing Endmills with 4xD Relieved Necks ECR-B-X
4-5 Flute, 45° Helix Solid Carbide Roughing Endmills with 4xD Relieved Necks

3 Flute, (3xD), 45° Helix Solid Carbide Roughing Endmills with Relieved Necks, for High Stock Removal Rates of Aluminum ECR-B3-R
3 Flute, (3xD), 45° Helix Solid Carbide Roughing Endmills with Relieved Necks, for High Stock Removal Rates of Aluminum

3 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum ECA-B-3
3 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum

4 Flute, 20° Helix Medium Length Solid Carbide Roughing Endmills, for High Stock Removal Rates ECR-T-M
4 Flute, 20° Helix Medium Length Solid Carbide Roughing Endmills, for High Stock Removal Rates

3, 4 Flute, 20° Helix Long Solid Carbide Roughing Ball Nose, for Materials up to 55 HRc EBRF-T
3, 4 Flute, 20° Helix Long Solid Carbide Roughing Ball Nose, for Materials up to 55 HRc

Economical Type 3 Flute, 30° and 38° Helix Center Cutting Short Solid Carbide Endmills EC-A3/E3 (economical-short)
Economical Type 3 Flute, 30° and 38° Helix Center Cutting Short Solid Carbide Endmills

4 Flute, 30° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc EC-A4
4 Flute, 30° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc

4 Flute, 45° Helix Extra-Long Solid Carbide Endmills with Various Corner Radii, for Hardened Steel EC-B4-R
4 Flute, 45° Helix Extra-Long Solid Carbide Endmills with Various Corner Radii, for Hardened Steel

2 Flute, 30° Tapered Helix Solid Carbide Endmills, for Hardened Steel ECT-A2
2 Flute, 30° Tapered Helix Solid Carbide Endmills, for Hardened Steel

2 Flute, 30° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc EC-A2 (medium length)
2 Flute, 30° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc

6 Flute, 45° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc EC-B6
6 Flute, 45° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc

Economical Type 4 Flute, 30° Helix Center Cutting Extra Long Solid Carbide Endmills EC-A4(economical-extra long)
Economical Type 4 Flute, 30° Helix Center Cutting Extra Long Solid Carbide Endmills

Combination of Roughing and Finishing Solid Carbide Endmill in a Single Tool EFS-B44
Combination of Roughing and Finishing Solid Carbide Endmill in a Single Tool

3 Flute, (3xD), 38° Helix Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges and Relieved Necks ECP-E3L
3 Flute, (3xD), 38° Helix Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges and Relieved Necks

4 Flute, (3xD), 38° Helix Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges and Relieved Necks ECP-E4L
4 Flute, (3xD), 38° Helix Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges and Relieved Necks

2 Flute Toroidal Endmills ETR-A2
2 Flute Toroidal Endmills

4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc ECR-B-MF
4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc

4 Flute Endmills, 38° Helix, Variable Pitch for Chatter Dampening with 3xD Relieved Necks EC-E4L-CF
4 Flute Endmills, 38° Helix, Variable Pitch for Chatter Dampening with 3xD Relieved Necks

5 Flute Endmills, 38° Helix, Variable Pitch Medium Length (1xD) EC-E5L-CF
5 Flute Endmills, 38° Helix, Variable Pitch Medium Length (1xD)

4 Flute High Productivity Solid Carbide Endmills EFF-S4
4 Flute High Productivity Solid Carbide Endmills

Economical Type 2 Flute, 30° Helix Center Cutting Medium Length Solid Carbide Endmills EC-A2 (economical-medium)
Economical Type 2 Flute, 30° Helix Center Cutting Medium Length Solid Carbide Endmills

Economical Type 2 Flute, 30° Helix Center Cutting Extra Long Solid Carbide Endmills EC-A2(economical-extra long)
Economical Type 2 Flute, 30° Helix Center Cutting Extra Long Solid Carbide Endmills

Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Medium Length Solid Carbide Endmills EC-A3/E3 (economical-medium)
Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Medium Length Solid Carbide Endmills

Economical Type 3 Flute, 45° Helix Center Cutting Medium Length Solid Carbide Endmills EC-B3 (economical-medium)
Economical Type 3 Flute, 45° Helix Center Cutting Medium Length Solid Carbide Endmills

Economical Type 4 Flute, 30° Helix Center Cutting Medium Length Solid Carbide Endmills EC-A4 (economical-medium)
Economical Type 4 Flute, 30° Helix Center Cutting Medium Length Solid Carbide Endmills

Combination of Roughing and Finishing Solid Carbide Endmill with Variable Pitch for Chatter Free Milling EFS-E44
Combination of Roughing and Finishing Solid Carbide Endmill with Variable Pitch for Chatter Free Milling

4 Flute Endmills with 3xD Relieved Necks, with Assorted Radii, Different Helix and Variable Pitch for Chatter Dampening EC-H4L-CFR (relieved neck)
4 Flute Endmills with 3xD Relieved Necks, with Assorted Radii, Different Helix and Variable Pitch for Chatter Dampening

4 Flute Endmills with Different Helix and Variable Pitch, for Chatter Dampening with Assorted Radii EC-H4M-CFR
4 Flute Endmills with Different Helix and Variable Pitch, for Chatter Dampening with Assorted Radii

5 Flute Endmills with Different Helix (36 - 38°) and Variable Pitch for Chatter Dampening with Assorted Radii EC-H5M-CFR
5 Flute Endmills with Different Helix (36 - 38°) and Variable Pitch for Chatter Dampening with Assorted Radii




Terms of Use and Legal Disclaimer