EFP-E4,5CF
Solid Carbide Roughing Endmills with Chip Splitting Cutting Edges, Variable Pitch and Large Radius Frontal Edge
|
|
ECAP-H3-CF
Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum
|
|
EC-A-2
2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills
|
|
ECC-A-2
2 Flute, 30° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners
|
|
|
ECL-B-4/6
4 & 6 Flute, 45° Helix Long Solid Carbide Endmills
|
|
EC-E-3
3 Flute, 38° Helix Medium Length Solid Carbide Endmills
|
|
EC-A-4
4 Flute, 30° Helix Medium Length Solid Carbide Endmills
|
|
EC-B-3
3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills
|
|
EC-B-4
4 Flute, 45° Helix Medium Length Solid Carbide Endmills
|
|
ECC-E-3
3 Flute, 38° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners
|
|
ECC-A-4
4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Chamfered Corners
|
|
EB-A-2
2 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills
|
|
|
ECXL-B-4/6
4 & 6 Flute, 45° Helix Extra Long Solid Carbide Endmills
|
|
ECH-B-6
6 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc
|
|
ECA-B-2
2 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum
|
|
ERF-A/E-3,4,6
3, 4, 6 Flute, 30° and 38° Helix, (3xD) Solid Carbide Roughing Endmills with Relieved Neck for Alloy and Stainless Steel
|
|
ERC-E-3
3 Flute, 38° Helix Medium Length (3xD) Solid Carbide Roughing Endmills with Relieved Necks, for Machining Aluminum
|
|
EC-B-3R
3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills with Various Radii
|
|
EC-B-4R
4 Flute, 45° Helix Medium Length Solid Carbide Endmills with Various Radii
|
|
ECA-F-2
2 Flute, 55° Helix Medium Length Solid Carbide Endmills for Machining Aluminum
|
|
EC-D6
6 Flute, 50° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc
|
|
ECR-B-S
4-7 Flute, 45° Helix Short Length (1xD) Solid Carbide Roughing Endmills
|
|
ECR-B-L
4-7 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks
|
|
|
MTEC-ISO
Solid Carbide Internal Threading Endmills for ISO Thread Profile
|
|
MTEC-W
Solid Carbide Threading Endmills, for Internal or External BSP Thread Profile
|
|
MTEC-UN
Solid Carbide Threading Endmills for Internal UN Thread Profile
|
|
MTEC-NPT
Solid Carbide Threading Endmills, for External or Internal NPT Thread Profile
|
|
MTEC-NPTF
Solid Carbide Threading Endmills, for External or Internal NPTF Thread Profile
|
|
ECR-B3-R
3 Flute, (3xD), 45° Helix Solid Carbide Roughing Endmills with Relieved Necks, for High Stock Removal Rates of Aluminum
|
|
ECA-B-3
3 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum
|
|
ECR-T-M
4 Flute, 20° Helix Medium Length Solid Carbide Roughing Endmills, for High Stock Removal Rates
|
|
EBRF-T
3, 4 Flute, 20° Helix Long Solid Carbide Roughing Ball Nose, for Materials up to 55 HRc
|
|
EC-A4
4 Flute, 30° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc
|
|
EC-B4-R
4 Flute, 45° Helix Extra-Long Solid Carbide Endmills with Various Corner Radii, for Hardened Steel
|
|
EC-A2 (medium length)
2 Flute, 30° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc
|
|
EC-B6
6 Flute, 45° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc
|
|
|
|
EFS-B44
Combination of Roughing and Finishing Solid Carbide Endmill in a Single Tool
|
|
|
EB-A2 (stub cut length)
2 Flute, 30° Helix Stub Cut Length, Ball Nose Solid Carbide Endmills, for Materials up to 55-70 HRc
|
|
MTECB-ISO
Solid Carbide Internal Threading Endmills with Coolant Holes for ISO Thread Profile
|
|
MTECB-UN
Solid Carbide Threading Endmills with Coolant Holes, for Internal UN Thread Profile
|
|
MTECB-NPT
Solid Carbide Threading Endmills with Coolant Holes, for External or Internal NPT Thread Profile
|
|
MTECB-NPTF
Solid Carbide Threading Endmills with Coolant Holes, for External or Internal NPTF Thread Profile
|
|
MTECB-W
Solid Carbide Internal or External Threading Endmills with Coolant Holes, for BSP Thread Profile
|
|
|
|
ECP-E3L
3 Flute, (3xD), 38° Helix Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges and Relieved Necks
|
|
ECP-E4L
4 Flute, (3xD), 38° Helix Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges and Relieved Necks
|
|
ECR-B-MF
4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc
|
|
EC-E4L-CF
4 Flute Endmills, 38° Helix, Variable Pitch for Chatter Dampening with 3xD Relieved Necks
|
|
EC-E5L-CF
5 Flute Endmills, 38° Helix, Variable Pitch Medium Length (1xD)
|
|
EB-A2 (extra long)
2 Flute, 30° Helix Extra Long Solid Carbide Ball Nose Endmills, for Materials up to 65 HRc
|
|
EFF-S4
4 Flute High Productivity Solid Carbide Endmills
|
|
|
|
|
|
|
|
|
|
EFS-E44
Combination of Roughing and Finishing Solid Carbide Endmill with Variable Pitch for Chatter Free Milling
|
|
MTECQ ISO
Solid Carbide Endmills with Internal Coolant Holes and a Reduced Diameter Neck, for Deep Internal ISO Profile Threading
|
|
MTECQ UN
Solid Carbide Endmills with Internal Coolant Holes and a Reduced Diameter Neck, for Deep Internal UN Profile Threading
|
|
EC-H4L-CFR (relieved neck)
4 Flute Endmills with 3xD Relieved Necks, with Assorted Radii, Different Helix and Variable Pitch for Chatter Dampening
|
|
EC-H4M-CFR
4 Flute Endmills with Different Helix and Variable Pitch, for Chatter Dampening with Assorted Radii
|
|
