HSK A-EM (DIN 1835 Form B) :  DIN6359 side clamp holders for DIN 1835 form B Weldon shanks with HSK DIN69893 form A tapered shanks.  
 .
 
RUNOUT (INT) 0.005MM (.0002 HARDNESS 58-60 SURFACE FINISH N5 COOLANT
Related solid for : HSK A 100 EM 8X 80

2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills EC-A-2
2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills

4 & 6 Flute, 45° Helix Long Solid Carbide Endmills ECL-B-4/6
4 & 6 Flute, 45° Helix Long Solid Carbide Endmills

3 Flute, 38° Helix Medium Length Solid Carbide Endmills EC-E-3
3 Flute, 38° Helix Medium Length Solid Carbide Endmills

4 Flute, 30° Helix Medium Length Solid Carbide Endmills EC-A-4
4 Flute, 30° Helix Medium Length Solid Carbide Endmills

3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills EC-B-3
3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills

4 Flute, 45° Helix Medium Length Solid Carbide Endmills EC-B-4
4 Flute, 45° Helix Medium Length Solid Carbide Endmills

3 Flute, 38° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners ECC-E-3
3 Flute, 38° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners

4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Chamfered Corners ECC-A-4
4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Chamfered Corners

6 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc ECH-B-6
6 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc

3, 4, 6 Flute, 30° and 38° Helix, (3xD) Solid Carbide Roughing Endmills with Relieved Neck for Alloy and Stainless Steel ERF-A/E-3,4,6
3, 4, 6 Flute, 30° and 38° Helix, (3xD) Solid Carbide Roughing Endmills with Relieved Neck for Alloy and Stainless Steel

3 Flute, 38° Helix Medium Length (3xD) Solid Carbide Roughing Endmills with Relieved Necks, for Machining Aluminum ERC-E-3
3 Flute, 38° Helix Medium Length (3xD) Solid Carbide Roughing Endmills with Relieved Necks, for Machining Aluminum

3 Flute, (3xD), 38° Helix, Short Solid Carbide Slot / Drill Endmills with Chamfered Corners and Relieved Neck ECS/ECCS-E-3
3 Flute, (3xD), 38° Helix, Short Solid Carbide Slot / Drill Endmills with Chamfered Corners and Relieved Neck

3 Flute, 38° Helix Short Undersized Slot / Drill Solid Carbide Endmills ECU-E-3
3 Flute, 38° Helix Short Undersized Slot / Drill Solid Carbide Endmills

4-7 Flute, 45° Helix Short Length (1xD) Solid Carbide Roughing Endmills ECR-B-S
4-7 Flute, 45° Helix Short Length (1xD) Solid Carbide Roughing Endmills

4-7 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks ECR-B-L
4-7 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks

4-7 Flute, 45° Helix Medium Length (2xD) Solid Carbide Roughing Endmills ECR-B-M/ECR-B-M...R
4-7 Flute, 45° Helix Medium Length (2xD) Solid Carbide Roughing Endmills

4-5 Flute, 45° Helix Solid Carbide Roughing Endmills with 4xD Relieved Necks ECR-B-X
4-5 Flute, 45° Helix Solid Carbide Roughing Endmills with 4xD Relieved Necks

3 Flute, (3xD), 45° Helix Solid Carbide Roughing Endmills with Relieved Necks, for High Stock Removal Rates of Aluminum ECR-B3-R
3 Flute, (3xD), 45° Helix Solid Carbide Roughing Endmills with Relieved Necks, for High Stock Removal Rates of Aluminum

3 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum ECA-B-3
3 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum

4 Flute, 20° Helix Medium Length Solid Carbide Roughing Endmills, for High Stock Removal Rates ECR-T-M
4 Flute, 20° Helix Medium Length Solid Carbide Roughing Endmills, for High Stock Removal Rates

3 Flute, 38° Helix Short Undersized Slot / Drill Solid Carbide Endmills with Various Radii According to DIN 6885 ECU-E-3-R
3 Flute, 38° Helix Short Undersized Slot / Drill Solid Carbide Endmills with Various Radii According to DIN 6885

Economical Type 3 Flute, 30° and 38° Helix Center Cutting Short Solid Carbide Endmills EC-A3/E3 (economical-short)
Economical Type 3 Flute, 30° and 38° Helix Center Cutting Short Solid Carbide Endmills

Economical Type 3 Flute, 45° Helix Center Cutting Short Solid Carbide Endmills EC-B3 (economical-short)
Economical Type 3 Flute, 45° Helix Center Cutting Short Solid Carbide Endmills

Combination of Roughing and Finishing Solid Carbide Endmill in a Single Tool EFS-B44
Combination of Roughing and Finishing Solid Carbide Endmill in a Single Tool

Economical Type 2 Flute, 30° Helix Center Cutting Short Solid Carbide Endmills EC-A2 (economical-short)
Economical Type 2 Flute, 30° Helix Center Cutting Short Solid Carbide Endmills

Economical Type 2 Flute, 30° Helix Ball Nose Solid Carbide Endmills EB-A2 (economical)
Economical Type 2 Flute, 30° Helix Ball Nose Solid Carbide Endmills

3 Flute, (3xD), 38° Helix Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges and Relieved Necks ECP-E3L
3 Flute, (3xD), 38° Helix Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges and Relieved Necks

4 Flute, (3xD), 38° Helix Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges and Relieved Necks ECP-E4L
4 Flute, (3xD), 38° Helix Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges and Relieved Necks

4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc ECR-B-MF
4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc

4 Flute Endmills, 38° Helix, Variable Pitch for Chatter Dampening with 3xD Relieved Necks EC-E4L-CF
4 Flute Endmills, 38° Helix, Variable Pitch for Chatter Dampening with 3xD Relieved Necks

5 Flute Endmills, 38° Helix, Variable Pitch Medium Length (1xD) EC-E5L-CF
5 Flute Endmills, 38° Helix, Variable Pitch Medium Length (1xD)

Combination of Roughing and Finishing Solid Carbide Endmill with Variable Pitch for Chatter Free Milling EFS-E44
Combination of Roughing and Finishing Solid Carbide Endmill with Variable Pitch for Chatter Free Milling

4 Flute Endmills with 3xD Relieved Necks, with Assorted Radii, Different Helix and Variable Pitch for Chatter Dampening EC-H4L-CFR (relieved neck)
4 Flute Endmills with 3xD Relieved Necks, with Assorted Radii, Different Helix and Variable Pitch for Chatter Dampening

4 Flute Endmills with Different Helix and Variable Pitch, for Chatter Dampening with Assorted Radii EC-H4M-CFR
4 Flute Endmills with Different Helix and Variable Pitch, for Chatter Dampening with Assorted Radii




Terms of Use and Legal Disclaimer