DIN69871-SRKIN :  SHRINKIN thermal chucking collet with integral DIN 69871 form AD/B taper shank. Can be used for carbide and HSS tools.  
 
 
RUNOUT (INT) 0.003MM(.00012 TAPER HARDNESS 50-52 SURFACE FINISH N5 SHRINKIN G2.5/SK40=25000RPM @ SK50=2000RPM COOLANT
Related tool for : DIN69871 40 SRKIN 12X80 B

45° Chamfering Endmills with X/Q/SOMT 06 Inserts E45X
45° Chamfering Endmills with X/Q/SOMT 06 Inserts

Drilling Endmills with Square S/XOMT Inserts E90XC
Drilling Endmills with Square S/XOMT Inserts

Endmills with Round Inserts for Profiling and Milling of Round Corners ER
Endmills with Round Inserts for Profiling and Milling of Round Corners

Indexable Threading Endmills with Cylindrical Carbide Shanks MTSR-C
Indexable Threading Endmills with Cylindrical Carbide Shanks

Ball Nose Endmills with Tangent Straight Edge Inserts for Finish Profiling BCM
Ball Nose Endmills with Tangent Straight Edge Inserts for Finish Profiling

Ball Nose Multifunction Endmills D=12 mm HCM D12
Ball Nose Multifunction Endmills D=12 mm

Multifunction Endmills which can Carry Several Insert Geometries HCE
Multifunction Endmills which can Carry Several Insert Geometries

Endmills with HELIPLUS HP ANKT 0702.. Inserts HP E90AN-07
Endmills with HELIPLUS HP ANKT 0702.. Inserts

Endmills with Tangentially Clamped Inserts T290 ELN-05
Endmills with Tangentially Clamped Inserts

Extended Flute Endmills with T290 LNMT/HT 0502... Tangentially Clamped Inserts T290 LNK-05
Extended Flute Endmills with T290 LNMT/HT 0502... Tangentially Clamped Inserts

Ball Nose Endmills D=8 mm CM D08
Ball Nose Endmills D=8 mm

Ball Nose Multifunction Endmills D=10 mm HCM D10
Ball Nose Multifunction Endmills D=10 mm




Terms of Use and Legal Disclaimer