E30 / T230
30° Chamfering Endmills

CM D10
Ball Nose Endmills D=10 mm

E45X
45° Chamfering Endmills with X/Q/SOMT 06 Inserts

E90X
Endmills with Square Q/S/XOMT Inserts

E90XC
Drilling Endmills with Square S/XOMT Inserts

3M E90AX
90° Endmills for 3M AXKT...Inserts

HM90 E90A-10
Endmills for HM90 AP.. 1003... Inserts

ER
Endmills with Round Inserts for Profiling and Milling of Round Corners

MTSR-C
Indexable Threading Endmills with Cylindrical Carbide Shanks

BCM
Ball Nose Endmills with Tangent Straight Edge Inserts for Finish Profiling

HCM D12
Ball Nose Multifunction Endmills D=12 mm

HCE
Multifunction Endmills which can Carry Several Insert Geometries

E93CN
Toroidal Bull Nose Endmills with CNHT...and ENHT... Inserts

HP E90AN-07
Endmills with HELIPLUS HP ANKT 0702.. Inserts

RM-BNT-3D/5D/8D (Shanks)
Shanks for BAYO T-REAM Interchangeable Head Reamers

DCN R-3D
Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 3xD

DCN R-5D
Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 5xD

T490 ELN-08
90° Face Mills Using Tangentially Clamped Inserts with 4 Helical, 8 mm Long Cutting Edges

T290 ELN-05
Endmills with Tangentially Clamped Inserts

HCM D16
Ball Nose Multifunction Endmills D=16 mm

HCM D10
Ball Nose Multifunction Endmills D=10 mm

FF EWX-04
Fast Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges

DCN R-8D
Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 8xD

DCN R-1.5D
Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 1.5xD

H490 E90AX-09
90° Endmills Using H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

HTP-LN06
Side Plungers Carrying Tangentially Clamped Inserts with 4 Cutting Edges

DCN R-12D
Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 12xD