CM D10
Ball Nose Endmills D=10 mm

E45X
45° Chamfering Endmills with X/Q/SOMT 06 Inserts

E60 / T260
60° Chamfering Endmills

E90X
Endmills with Square Q/S/XOMT Inserts

E90XC
Drilling Endmills with Square S/XOMT Inserts

DCM-3D (7.5-25.9 mm)
Indexable Head Drills with One Flat Shanks, Drilling Depth 3xD

DCM-5D (7.5-25.9 mm)
Indexable Head Drills with One Flat Shanks, Drilling Depth 5xD

BCM
Ball Nose Endmills with Tangent Straight Edge Inserts for Finish Profiling

DCM-3.5D (7.5-20.9 mm)
Indexable Head Drills without a Flange and One Flat Shanks, Drilling Depth 3.5xD, Suitable for Chamfering Holders

HP E90AN-07
Endmills with HELIPLUS HP ANKT 0702.. Inserts

DR-MF-2.25D
Multifunction Drilling, Boring, Facing and External Turning Tool

T290 LNK-05
Extended Flute Endmills with T290 LNMT/HT 0502... Tangentially Clamped Inserts

CM D08
Ball Nose Endmills D=8 mm

DCN A-1.5D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 1.5xD

DCN A-3D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 3xD

DCN A-5D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 5xD

DCN A-8D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 8xD

DCNS-3D
Indexable Head Drills without a Flange and One Flat Shank, Drilling Depth 3xD, Suitable for Chamfering Holders

DCNS-5D
Indexable Head Drills without a Flange and One Flat Shank, Drilling Depth 5xD, Suitable for Chamfering Holders