C#-SEMC :  DIN 6358 COMBI shell mill holders with CAMFIX (ISO 26623-1 standard) exchangeable, tapered shanks.  
 
 
RUNOUT (EXT) 0.005MM (.0002 HARDNESS 58-60 SURFACE FINISH N5
Related tool for : C4 SEMC16X 45

Shell Mills with Coolant Holes for Helical Threading Inserts MTSRH (helical shell mill)
Shell Mills with Coolant Holes for Helical Threading Inserts

75° Face Mills with SPKN/SPKR/SPUN 1203.. Inserts F75
75° Face Mills with SPKN/SPKR/SPUN 1203.. Inserts

75° Face Mills with HM90 AD..-1505... Inserts F75A
75° Face Mills with HM90 AD..-1505... Inserts

90° Face Mills with S/X/QPMT 1004... Inserts F90SP-10
90° Face Mills with S/X/QPMT 1004... Inserts

Heavy Duty 90° Face Mills with 3M AXKT 1304.. Inserts 3M F90AX-13
Heavy Duty 90° Face Mills with 3M AXKT 1304.. Inserts

90° Face Mills with HM90 ADKT 1505... Inserts HM90 F90A-15
90° Face Mills with HM90 ADKT 1505... Inserts

90° Face Mills with LN..1106... Tangentially Clamped Inserts F90LN-N11
90° Face Mills with LN..1106... Tangentially Clamped Inserts

Adjustable 90° Face Mills (used mainly for PCD/CBN inserts) F90LN-FR CA11
Adjustable 90° Face Mills (used mainly for PCD/CBN inserts)

90° Face Mills with HM90 APKT 1003... Inserts HM90 F90AP-10
90° Face Mills with HM90 APKT 1003... Inserts

Fast Feed Face Mills FF FW
Fast Feed Face Mills

90° Face Mills with HP ANKT 0702.. Inserts HP F90AN-07
90° Face Mills with HP ANKT 0702.. Inserts

Rough Profiling Face Mills with Serrated or Regular Round Inserts FRW
Rough Profiling Face Mills with Serrated or Regular Round Inserts

45° Face Mills Carrying Economical Inserts with 8 Helical Right-Hand Cutting Edges S845 F45SX-16
45° Face Mills Carrying Economical Inserts with 8 Helical Right-Hand Cutting Edges

90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-17
90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

Grooving Shell Mills with Triple-Edged Precision Ground Inserts TRIB-SM
Grooving Shell Mills with Triple-Edged Precision Ground Inserts

90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, 13 mm Long Cutting Edges T490 FLN-13
90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, 13 mm Long Cutting Edges

90° Face Mills Carrying H490 ANKX 12.. Double-Sided, Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-12
90° Face Mills Carrying H490 ANKX 12.. Double-Sided, Rectangular Inserts with 4 Helical Cutting Edges

90° Face Mills with Tangentially Clamped Inserts T490 FLN-08
90° Face Mills with Tangentially Clamped Inserts

Shell Mill Plungers Carrying Tangentially Clamped Inserts with 4 Cutting Edges HTP-R-LN10
Shell Mill Plungers Carrying Tangentially Clamped Inserts with 4 Cutting Edges

Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges FF FWX-05
Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges

90° Face Mills with T290 LNMT 1506... Tangentially Clamped Inserts T290 FLN-15
90° Face Mills with T290 LNMT 1506... Tangentially Clamped Inserts

Moderate Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges MF FWX-05
Moderate Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges

90° Face Mills Carrying the H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-09
90° Face Mills Carrying the H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

Face Mills Carrying Double-Sided Inserts with Four 6 mm Radius Cutting Edges H400 FR-12
Face Mills Carrying Double-Sided Inserts with Four 6 mm Radius Cutting Edges

90° Face Mills with T290 LNMT 1004... Tangentially Clamped Inserts T290 FLN-10
90° Face Mills with T290 LNMT 1004... Tangentially Clamped Inserts

Fast Feed Shell Mill Carrying Tangentially Clamped Inserts with 4 Cutting Edges FTP-LN10
Fast Feed Shell Mill Carrying Tangentially Clamped Inserts with 4 Cutting Edges

Multifunctional Face Mills for Square Octagonal Insert Contours S890 FSN-13
Multifunctional Face Mills for Square Octagonal Insert Contours

Face Mills Carrying Double-Sided Inserts with Four 5 mm Radius Cutting Edges H400 FR-10
Face Mills Carrying Double-Sided Inserts with Four 5 mm Radius Cutting Edges

Full Slot Shell Mill Cutters with LNET 08... Tangentially Mounted Inserts FDN-LN08
Full Slot Shell Mill Cutters with LNET 08... Tangentially Mounted Inserts

90° Face Mills Carrying 18 mm Long Edged Inserts P290 FPW
90° Face Mills Carrying 18 mm Long Edged Inserts

Face Mills Carrying Double-Sided Inserts with Six 6 mm Radius Cutting Edges H606 FR-12
Face Mills Carrying Double-Sided Inserts with Six 6 mm Radius Cutting Edges

Extended Flute Shell Mills Using H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 SM-09
Extended Flute Shell Mills Using H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

Extended Flute Shell Mills Using H490 ANKX 12.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 SM-12
Extended Flute Shell Mills Using H490 ANKX 12.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

90° Face Mills Carrying HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-15
90° Face Mills Carrying HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges

90° Face Mills Carrying the HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges HM390 FTP-10
90° Face Mills Carrying the HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges




Terms of Use and Legal Disclaimer