T290 ELN-10
Endmills with Tangentially Clamped Inserts

MF EWX
Moderate Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges

E45 / T245
45° Chamfering Endmills

E90X
Endmills with Square Q/S/XOMT Inserts

E90XC
Drilling Endmills with Square S/XOMT Inserts

HM90 E90A-10
Endmills for HM90 AP.. 1003... Inserts

MTSR
Indexable Threading Endmills

MTSR-Double Insert
Double Insert Threading Endmills with Weldon Shanks

HP E90AN-07
Endmills with HELIPLUS HP ANKT 0702.. Inserts

HP ANK-07
Extended Flute Endmills with HP ANK-07... Inserts

ETS-LN08
Grooving and Slitting Cutters

T490 LNM-08
Extended Flute Endmills with T490 LNMT/HT 08... Tangentially Clamped Inserts

T490 ELN-08
90° Face Mills Using Tangentially Clamped Inserts with 4 Helical, 8 mm Long Cutting Edges

SOE45 8/16
Multifunctional Endmills for Octagonal, Square and Round Insert Contours with Various Entry Angles

FF EWX-04
Fast Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges

H490 E90AX-09
90° Endmills Using H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

DCN A-1.5D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 1.5xD

DCN A-3D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 3xD

DCN A-5D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 5xD

DCN A-8D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 8xD