CCMT/CCGT :  80° rhombic 7° positive flank inserts for semi-finish and finish turning. Chip breaking in moderate feed range. Positive rake, low cutting forces. Used for a wide range of materials, including soft and exotic alloys.  
 
 
Int. 80°diamond 90° approach Int. back turnin 80° diamond Int. chamfering 80° diamond ITS-BORE system Ext. 80° diamond 93° approach Ext. 80° diamond 95° approach Int. 80° diamond 95° approach
Related tool for : CCMT 060202

Screw Lock Boring Bars for 80° Rhombic Inserts with 7° Clearance E/S-SCLCR/L
Screw Lock Boring Bars for 80° Rhombic Inserts with 7° Clearance

Screw Lock Toolholders for 80° Diamond Inserts with 7° Clearance Angle SCLCR/L
Screw Lock Toolholders for 80° Diamond Inserts with 7° Clearance Angle

Screw Lock Holders for 7° Clearance 80° Diamond Inserts for Swiss Type Machines SCACR/L
Screw Lock Holders for 7° Clearance 80° Diamond Inserts for Swiss Type Machines

Rough Boring Tools for Twin Cutters. Radial and Axial Edge Positioned Inner to the Opposite Finishing Tool IHSR
Rough Boring Tools for Twin Cutters. Radial and Axial Edge Positioned Inner to the Opposite Finishing Tool

Boring Toolholders for the MB Modular Boring System IHCR
Boring Toolholders for the MB Modular Boring System

80° Rhombic Insert Holders for Mounting on the MB Fine Boring Heads IHRF
80° Rhombic Insert Holders for Mounting on the MB Fine Boring Heads

Side Lever Lock Tools for 80° Positive Rhombic Inserts for Swiss Automatic Machines PCLCR/L-S
Side Lever Lock Tools for 80° Positive Rhombic Inserts for Swiss Automatic Machines

Interchangeable Screw Clamped Boring Heads for Positive 7° Clearance 80° Rhombic Inserts, Mounted on Carbide Bars E-SCLCR/L-HEAD
Interchangeable Screw Clamped Boring Heads for Positive 7° Clearance 80° Rhombic Inserts, Mounted on Carbide Bars

Back Face Turning Tools for BHR and TCH Rough Boring Heads IHSR-BW
Back Face Turning Tools for BHR and TCH Rough Boring Heads

Back Face Turning Toolholders for BHF and TCH Fine Boring Heads IHRF-BW
Back Face Turning Toolholders for BHF and TCH Fine Boring Heads

Chamfering Tools for BHF Boring Heads IHRF-CH
Chamfering Tools for BHF Boring Heads

Chamfering Tools for BHR Boring Heads IHSR-CH
Chamfering Tools for BHR Boring Heads

Boring Tools for Twin Cutters, Inner to the Opposite - Finishing Tools on MB BHC Combi Boring Heads IHRF-C
Boring Tools for Twin Cutters, Inner to the Opposite - Finishing Tools on MB BHC Combi Boring Heads

Rhombic Rough Insert Holders for BHC Combi Boring Heads IHSR-C
Rhombic Rough Insert Holders for BHC Combi Boring Heads




Terms of Use and Legal Disclaimer