EFF-S4 :  High productivity solid carbide endmills. Can operate at feed rates up to 0.5 mm/tooth, at 0.3 to 0.7 mm D.O.C. even with long overhang. Used on cast iron, hardened steel up to 65 HRc, stainless steel, titanium and nickel based alloys.  
 
 
Profiling   Ramp down   Shouldering   Slotting   Helical interpolation   Counter boring   Plunging & recessing  
  Designation
D
d
L
H
rShould be used for programming
R		 ap
max		 fz
(min)		 fz
(max)
  Grade
  EFF-S4-06 030/20C06R1.0M  6.00  6.00  57.00  20.00  1.23  5.3  0.30  0.10  0.30 IC903
  EFF-S4-08 035/26C08R1.3M  8.00  8.00  63.00  26.00  1.62  7.0  0.40  0.10  0.40 IC903
  EFF-S4-10 040/30C10R1.6M  10.00  10.00  72.00  30.00  2.01  8.8  0.50  0.15  0.50 IC903
  EFF-S4-12 045/34C12R2.0M  12.00  12.00  83.00  34.00  2.47  10.6  0.60  0.15  0.50 IC903
  EFF-S4-16 055/42C16R2.6M  16.00  16.00  92.00  42.00  3.25  14.0  0.80  0.20  0.60 IC903
  EFF-S4-20 060/46C20R3.2M  20.00  20.00  104.00  46.00  4.02  17.7  1.00  0.20  0.70 IC903

Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer