MM EFF :  MULTI-MASTER, 4 or 6 flute FEEDMILL, interchangeable solid carbide heads. Used for milling at very high feed and small D.O.C.  
 
 
Profiling   Ramp down   Helical interpolation   Slotting   Plunging & recessing  
  Designation
D
Z
ap
Ts
D2
l
a°
rShould be used for programming		 fz
(min)		 fz
(max)
  Grade
  MM EFF080T3R1.62-4T05  8.00  4  0.40  T05  7.50  10.00  7  1.62  0.12  0.48 IC903
  MM EFF100T4R2.01-4T06  10.00  4  0.50  T06  9.50  13.00  7  2.01  0.16  0.57 IC903
  MM EFF120T4R1.8-4T08H  12.00  4  0.60  T08  11.50  16.50  7  1.80  0.16  0.67 IC908
  MM EFF120T4R2.47-4T08  12.00  4  0.60  T08  11.50  16.50  7  2.47  0.16  0.67 IC903
  MM EFF127T4R2.59-4T08  12.70  4  0.60  T08  12.20  16.50  7  2.59  0.16  0.67 IC903
  MM EFF160T5R2.2-4T10H  16.00  4  0.80  T10  15.30  20.50  7  2.20  0.20  0.75 IC908
  MM EFF160T5R3.25-4T10  16.00  4  0.80  T10  15.30  20.50  7  3.25  0.20  0.75 IC903
  MM EFF200T6R4.02-4T12  20.00  4  1.00  T12  18.30  25.50  7  4.02  0.20  0.90 IC903
  MM EFF250A7R3.1-6T15  25.00  6  1.20  T15  23.90  25.00  7  3.10  0.25  1.00 IC903
  MM EFF254A7R3.63-6T15  25.40  6  1.20  T15  23.90  25.00  7  3.10  0.25  1.00 IC903

For Clamping keys (should be ordered separately), tightening torques and clamping instructions, click on "More Info".
Do not apply lubricant to the threaded connection.
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer