BT-EM (Short) :  Short DIN6359 / DIN 1835 form B Weldon endmill holders with BT MAS-403 AD tapered shanks.  
 
 
RUNOUT (INTERNAL) 0.005  TAPER  HARDNESS 58-60  SURFACE FINISH N5 
COOLANT 
Related tool for: BT-EM (Short)

Heavy Duty Extended Flute Endmills with 3M AXKT 1304... Inserts 3M AXK-13
Heavy Duty Extended Flute Endmills with 3M AXKT 1304... Inserts

90° Endmills for 3M AXKT...Inserts 3M E90AX
90° Endmills for 3M AXKT...Inserts

Extended Flute Endmills with APKT/R-10... Inserts APK-FE
Extended Flute Endmills with APKT/R-10... Inserts

Ball Nose Endmills with Tangent Straight Edge Inserts for Finish Profiling BCM
Ball Nose Endmills with Tangent Straight Edge Inserts for Finish Profiling

Ball Nose Endmills D=8 mm CM D08
Ball Nose Endmills D=8 mm

Ball Nose Endmills D=10 mm CM D10
Ball Nose Endmills D=10 mm

Indexable Head Drills without a Flange and One Flat Shanks, Drilling Depth 3.5xD. Suitable for Chamfering Holders. DCM-3.5D (7.5-20.9 mm)
Indexable Head Drills without a Flange and One Flat Shanks, Drilling Depth 3.5xD. Suitable for Chamfering Holders.

Indexable Head Drills with One Flat Shanks, Drilling Depth 3xD DCM-3D (7.5-25.9mm)
Indexable Head Drills with One Flat Shanks, Drilling Depth 3xD

Indexable Head Drills with One Flat Shanks, Drilling Depth 5xD DCM-5D (7.5-25.9mm)
Indexable Head Drills with One Flat Shanks, Drilling Depth 5xD

Indexable Head Drills with One Flat Shanks, Drilling Depth 8xD DCM-8D (10-25.9mm)
Indexable Head Drills with One Flat Shanks, Drilling Depth 8xD

Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 1.5xD DCN A-1.5D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 1.5xD

Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 3xD DCN A-3D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 3xD

Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 5xD DCN A-5D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 5xD

Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 8xD DCN A-8D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 8xD

Indexable Head Drills with Chamfering Insert, Mainly for Pre-Thread Holes DCT (M8-M24)
Indexable Head Drills with Chamfering Insert, Mainly for Pre-Thread Holes

Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD DR-2D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD

Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD DR-3D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD

Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD DR-4D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD

Indexable Square Insert Drills with Coolant Holes, Drilling Depth 5xD DR-5D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 5xD

Multifunction Drilling, Boring, Facing and External Turning Tool DR-MF-2.25D
Multifunction Drilling, Boring, Facing and External Turning Tool

Indexable Head Drills with Coolant Holes, Drilling Depth 1.5xD DSM-1.5D (10.0-19.9mm 1.5xD)
Indexable Head Drills with Coolant Holes, Drilling Depth 1.5xD

Indexable Head Drills with Coolant Holes, Drilling Depth 3xD DSM-3D (10.0-19.9 mm 3xD)
Indexable Head Drills with Coolant Holes, Drilling Depth 3xD

Indexable Head Drills with Coolant Holes, Drilling Depth 5xD DSM-5D (10.0-19.9 mm 5xD)
Indexable Head Drills with Coolant Holes, Drilling Depth 5xD

30° Chamfering Endmills E30 / T230
30° Chamfering Endmills

45° Chamfering Endmills E45 / T245
45° Chamfering Endmills

45° Endmills, Carrying Octagonal or Round Inserts E45KT
45° Endmills, Carrying Octagonal or Round Inserts

45° Chamfering Endmills with X/Q/SOMT 06 Inserts E45X
45° Chamfering Endmills with X/Q/SOMT 06 Inserts

60° Chamfering Endmills E60 / T260
60° Chamfering Endmills

75° Endmills with AP..-1003... Inserts E75A
75° Endmills with AP..-1003... Inserts

Drilling Endmills with APKT/ADKT Inserts E90AC
Drilling Endmills with APKT/ADKT Inserts

Endmills with Square S/XPMT Inserts E90SP
Endmills with Square S/XPMT Inserts

Endmills with Square Q/S/XOMT Inserts E90X
Endmills with Square Q/S/XOMT Inserts

Drilling Endmills with Square S/XOMT Inserts E90XC
Drilling Endmills with Square S/XOMT Inserts

Multifunctional Endmills for Four Insert Shapes ECM
Multifunctional Endmills for Four Insert Shapes

T-Slot Endmills ETS
T-Slot Endmills

Grooving and Slitting Cutters ETS-LN08
Grooving and Slitting Cutters

45° Endmills with SEKN/R 12... Inserts F45E (endmill)
45° Endmills with SEKN/R 12... Inserts

45° Screw Clamped Endmills with SEK/MT 12... Inserts F45ST (endmill)
45° Screw Clamped Endmills with SEK/MT 12... Inserts

Fast Feed Endmills with FF WOMT... Inserts FF EW
Fast Feed Endmills with FF WOMT... Inserts

Fast Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges FF EWX-04
Fast Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges

Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges FF EWX-05
Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges

Endmills for Groove Milling, with GIPI/GIFI/TIPI Inserts GM
Endmills for Groove Milling, with GIPI/GIFI/TIPI Inserts

Extended Flute Endmills Using H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 ANK-09C
Extended Flute Endmills Using H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

90° Endmills Using H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 E90AX-09
90° Endmills Using H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

90° Endmills Carrying H490 ANKX 12...Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 E90AX-12
90° Endmills Carrying H490 ANKX 12...Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

Endmills for HM90 AP.. 1003... Inserts HM90 E90A-10
Endmills for HM90 AP.. 1003... Inserts

90° Endmills for HM90 ADKT-1505... Inserts HM90 E90AD-15
90° Endmills for HM90 ADKT-1505... Inserts

Long Reach Endmills for Machining Aluminum, with HM90 APCR 2206... Inserts HM90 EAL-22
Long Reach Endmills for Machining Aluminum, with HM90 APCR 2206... Inserts

Extended Flute Endmills with HP ANK-07... Inserts HP ANK-07
Extended Flute Endmills with HP ANK-07... Inserts

Endmills with HELIPLUS HP ANKT 0702.. Inserts HP E90AN-07
Endmills with HELIPLUS HP ANKT 0702.. Inserts

90° Endmills with HP AD.. 1906.. Inserts HP E90AT-19
90° Endmills with HP AD.. 1906.. Inserts

Indexable Threading Endmills MTSR
Indexable Threading Endmills

Double Insert Threading Endmills with Weldon Shanks MTSR-Double Insert
Double Insert Threading Endmills with Weldon Shanks

Endmills with Coolant Holes for Helical Threading Inserts MTSRH (endmills)
Endmills with Coolant Holes for Helical Threading Inserts

Grooving and Slitting Cutters with Integral Weldon Shanks SGSF-W
Grooving and Slitting Cutters with Integral Weldon Shanks

45° Endmills Carrying Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges SOE45 8/16
45° Endmills Carrying Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges

90° Face Mills Using Tangentially Clamped Inserts with 4 Helical, 8 mm Long Cutting Edges T490 ELN-08
90° Face Mills Using Tangentially Clamped Inserts with 4 Helical, 8 mm Long Cutting Edges

90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, 13 mm Long Cutting Edges T490 ELN-13
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, 13 mm Long Cutting Edges

Extended Flute Endmills with T490 LNMT/HT 08... Tangentially Clamped Inserts T490 LNM-08
Extended Flute Endmills with T490 LNMT/HT 08... Tangentially Clamped Inserts

Grooving Shell Mills with Triple-Edged Precision Ground Inserts TRIB
Grooving Shell Mills with Triple-Edged Precision Ground Inserts

Extended Flute Endmills with S/Q/XOMT-06.. Inserts XOK
Extended Flute Endmills with S/Q/XOMT-06.. Inserts




Terms of Use and Legal Disclaimer