DIN2080-FM :  DIN6357 face mill holders with DIN2080 A taper shanks.  
 
 
RUNOUT (EXTERNAL) 0.005  TAPER  HARDNESS 58-60  SURFACE FINISH N5 
Related tool for: DIN2080-FM

Heavy Duty 45° Face Mills with 3M AXKT 2006... Inserts 3M F45AX-20
Heavy Duty 45° Face Mills with 3M AXKT 2006... Inserts

Heavy Duty, 75° Face Mills with 3M AXKT 1304... Inserts 3M F75AX-13
Heavy Duty, 75° Face Mills with 3M AXKT 1304... Inserts

Heavy Duty 90° Face Mills with 3M AXKT 1304.. Inserts 3M F90AX-13
Heavy Duty 90° Face Mills with 3M AXKT 1304.. Inserts

Heavy Duty 90° Face Mills with 3M AXKT 2006.. Inserts 3M F90AX-20
Heavy Duty 90° Face Mills with 3M AXKT 2006.. Inserts

Heavy Duty Extended Flute Shell Mills with 3M AXKT 1304.../2006... Inserts 3M SM
Heavy Duty Extended Flute Shell Mills with 3M AXKT 1304.../2006... Inserts

45° Face Mills with SEKN/R 12... Inserts F45E
45° Face Mills with SEKN/R 12... Inserts

45° Face Mills, Carrying Octagonal or Round Inserts F45KT
45° Face Mills, Carrying Octagonal or Round Inserts

45° Face Mills with LN..1506... Tangentially Clamped Inserts F45LN-N15
45° Face Mills with LN..1506... Tangentially Clamped Inserts

45° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges F45NM
45° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges

45° Screw Clamped Face Mills with SEK/MT 12... Inserts F45ST
45° Screw Clamped Face Mills with SEK/MT 12... Inserts

45° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges F45WG
45° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges

75° Face Mills with SPKN/SPKR/SPUN 1203.. Inserts F75
75° Face Mills with SPKN/SPKR/SPUN 1203.. Inserts

75° Face Mills with HM90 AD..-1505... Inserts F75A
75° Face Mills with HM90 AD..-1505... Inserts

86° Face Mills Carrying all 8 Cutting Edges of LN..1106... Tangentially Clamped Inserts F86LNX-11
86° Face Mills Carrying all 8 Cutting Edges of LN..1106... Tangentially Clamped Inserts

86° Face Mills Using all 8 Cutting Edges of LN..1506... Tangentially Clamped Inserts F86LNX-15
86° Face Mills Using all 8 Cutting Edges of LN..1506... Tangentially Clamped Inserts

90° Face Mills with TPKN/R Inserts F90
90° Face Mills with TPKN/R Inserts

Adjustable 90° Face Mills (used mainly for PCD/CBN inserts) F90LN-FR CA11
Adjustable 90° Face Mills (used mainly for PCD/CBN inserts)

90° Face Mills with LN..1106... Tangentially Clamped Inserts F90LN-N11
90° Face Mills with LN..1106... Tangentially Clamped Inserts

90° Face Mills with LN..1506... Tangentially Clamped Inserts F90LN-N15
90° Face Mills with LN..1506... Tangentially Clamped Inserts

90° Face Mills with S/QDM. 12... Inserts (Japanese standard) F90SD-12
90° Face Mills with S/QDM. 12... Inserts (Japanese standard)

90° Face Mills Using SDMT 1606... Inserts F90SD-16
90° Face Mills Using SDMT 1606... Inserts

90° Face Mills with S/X/QPMT 1004... Inserts F90SP-10
90° Face Mills with S/X/QPMT 1004... Inserts

Face Mills for Four Different Insert Contours FCM
Face Mills for Four Different Insert Contours

Full Slot, Flange-Type Slotting Cutters FDN
Full Slot, Flange-Type Slotting Cutters

Full Slot, Flange Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts FDN-CALN11
Full Slot, Flange Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts

Full Slot, Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts FDN-CALN12
Full Slot, Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts

Full Slot, Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506... Inserts (18.9-25.6 mm width range) FDN-CALN15
Full Slot, Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506... Inserts (18.9-25.6 mm width range)

Full Width Slotting Cutters, Flanged Type with Round and Octagonal Inserts FDN-CM
Full Width Slotting Cutters, Flanged Type with Round and Octagonal Inserts

Full Slot Cutters with LNET 12... Tangentially Mounted Inserts FDN-LN12
Full Slot Cutters with LNET 12... Tangentially Mounted Inserts

Fast Feed Face Mills FF FW
Fast Feed Face Mills

Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges FF FWX-08
Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges

Face Mills with Round Inserts for Profiling and Milling of Round Corners FR
Face Mills with Round Inserts for Profiling and Milling of Round Corners

Rough Profiling Face Mills with Serrated or Regular Round Inserts FRW
Rough Profiling Face Mills with Serrated or Regular Round Inserts

Bottom-Side Cutting, Flanged Type Slotting Cutters FSB
Bottom-Side Cutting, Flanged Type Slotting Cutters

Top-Side Cutting, Flanged Type Slotting Cutters FST
Top-Side Cutting, Flanged Type Slotting Cutters

Face Mills Carrying Double-Sided Inserts with Four 8 mm Radius Cutting Edges H400 FR-16
Face Mills Carrying Double-Sided Inserts with Four 8 mm Radius Cutting Edges

90° Face Mills Carrying H490 ANKX 12.. Double-Sided, Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-12
90° Face Mills Carrying H490 ANKX 12.. Double-Sided, Rectangular Inserts with 4 Helical Cutting Edges

90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-17
90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

Extended Flute Shell Mills Using H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 SM-17
Extended Flute Shell Mills Using H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

90° Face Mills with HM90 ADKT 1505... Inserts HM90 F90A-15
90° Face Mills with HM90 ADKT 1505... Inserts

90° Face Mills with HM90 APKT 1003... Inserts HM90 F90AP-10
90° Face Mills with HM90 APKT 1003... Inserts

Face Mills for Machining Aluminum, with HM90 APCR 1605... Inserts HM90 FAL-16
Face Mills for Machining Aluminum, with HM90 APCR 1605... Inserts

Face Mills for Machining Aluminum, with HM90 APCR 2206... Inserts HM90 FAL-22
Face Mills for Machining Aluminum, with HM90 APCR 2206... Inserts

Face Mills Carrying Octagonal, Round and High Feed Segmented Radius Inserts HOF
Face Mills Carrying Octagonal, Round and High Feed Segmented Radius Inserts

Moderate Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges MF FWX-05
Moderate Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges

Moderate Feed Face Mills, Carrying Double-Sided Inserts with 6 Cutting Edges MF FWX-08
Moderate Feed Face Mills, Carrying Double-Sided Inserts with 6 Cutting Edges

45° Face Mills Carrying Economical Inserts with 8 Helical Right-Hand Cutting Edges S845 F45SX-16
45° Face Mills Carrying Economical Inserts with 8 Helical Right-Hand Cutting Edges

65° Face Mills Carrying Inserts with 8 Cutting Edges S865 FSN-13
65° Face Mills Carrying Inserts with 8 Cutting Edges

88° Face Mills Carrying Inserts with 8 Cutting Edges S890 FSN-13
88° Face Mills Carrying Inserts with 8 Cutting Edges

Extended Flute Shell Mills with HM90 ADKT 1505... Inserts SM
Extended Flute Shell Mills with HM90 ADKT 1505... Inserts

45° Face Mills, Carrying Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges SOF45
45° Face Mills, Carrying Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges

45° Extra Fine Pitch Face Mills with Wedge Clamped Inserts, Carrying Square or Octagonal Inserts with 8/16 Cutting Edges SOF45CL
45° Extra Fine Pitch Face Mills with Wedge Clamped Inserts, Carrying Square or Octagonal Inserts with 8/16 Cutting Edges

Face Mills with Adjustable Cartridges for High Speed Machining of Aluminum Alloys, Cast Iron and Carbon Fiber SPM-D-CA
Face Mills with Adjustable Cartridges for High Speed Machining of Aluminum Alloys, Cast Iron and Carbon Fiber

65° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, 22 mm Long Cutting Edges T465 FLN-22
65° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, 22 mm Long Cutting Edges

90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, 13 mm Long Cutting Edges T490 FLN-13
90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, 13 mm Long Cutting Edges

90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, 16 mm Long Cutting Edges T490 FLN-16
90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, 16 mm Long Cutting Edges

Extended Flute Shell Mills with T490 LNMT/HT 1306... Tangentially Clamped Inserts T490 SM-13
Extended Flute Shell Mills with T490 LNMT/HT 1306... Tangentially Clamped Inserts




Terms of Use and Legal Disclaimer