ER-SPR :  DIN 6499 ER spring collets with HARD TOUCH coating which increases wear resistance, improves corrosion protection, prolongs the surface finish quality and maintains longer run-out accuracy.  
 
 
HARDNESS 46-48  SURFACE FINISH N5 
Related tool for: ER-SPR

90° Endmills for 3M AXKT...Inserts 3M E90AX
90° Endmills for 3M AXKT...Inserts

Extended Flute Endmills for Machining Aluminum APK-22
Extended Flute Endmills for Machining Aluminum

Ball Nose Endmills with Tangent Straight Edge Inserts for Finish Profiling BCM
Ball Nose Endmills with Tangent Straight Edge Inserts for Finish Profiling

Ball Nose Endmills D=8 mm CM D08
Ball Nose Endmills D=8 mm

Ball Nose Endmills D=10 mm CM D10
Ball Nose Endmills D=10 mm

Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 1.5xD DCN R-1.5D
Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 1.5xD

Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 12xD DCN R-12D
Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 12xD

Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 3xD DCN R-3D
Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 3xD

Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 5xD DCN R-5D
Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 5xD

Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 8xD DCN R-8D
Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 8xD

45° Endmills, Carrying Octagonal or Round Inserts E45KT
45° Endmills, Carrying Octagonal or Round Inserts

45° Chamfering Endmills with X/Q/SOMT 06 Inserts E45X
45° Chamfering Endmills with X/Q/SOMT 06 Inserts

Drilling Endmills with APKT/ADKT Inserts E90AC
Drilling Endmills with APKT/ADKT Inserts

90° Endmills with CNHT 0703 Inserts E90CN
90° Endmills with CNHT 0703 Inserts

Endmills with Square S/XPMT Inserts E90SP
Endmills with Square S/XPMT Inserts

Endmills with Square Q/S/XOMT Inserts E90X
Endmills with Square Q/S/XOMT Inserts

Drilling Endmills with Square S/XOMT Inserts E90XC
Drilling Endmills with Square S/XOMT Inserts

Toroidal Bull Nose Endmills with CNHT...and ENHT... Inserts E93CN
Toroidal Bull Nose Endmills with CNHT...and ENHT... Inserts

Endmills with Round Inserts for Profiling and Milling of Round Corners ER
Endmills with Round Inserts for Profiling and Milling of Round Corners

Multifunctional Coarse Pitch Endmills for Four Insert Shapes ERCM
Multifunctional Coarse Pitch Endmills for Four Insert Shapes

Rough Profiling Endmills with Serrated or Regular Round Inserts ERW
Rough Profiling Endmills with Serrated or Regular Round Inserts

45° Endmills with SEKN/R 12... Inserts F45E (endmill)
45° Endmills with SEKN/R 12... Inserts

Fast Feed Endmills with FF WOMT... Inserts FF EW
Fast Feed Endmills with FF WOMT... Inserts

Fast Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges FF EWX-04
Fast Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges

Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges FF EWX-05
Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges

Endmills Carrying Double-Sided Inserts with Four 5 mm Radius Cutting Edges H400 ER-10
Endmills Carrying Double-Sided Inserts with Four 5 mm Radius Cutting Edges

Endmills Carrying Double-Sided Inserts with Four 6 mm Radius Cutting Edges H400 ER-12
Endmills Carrying Double-Sided Inserts with Four 6 mm Radius Cutting Edges

90° Endmills Using H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 E90AX-09
90° Endmills Using H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

90° Endmills Carrying H490 ANKX 12...Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 E90AX-12
90° Endmills Carrying H490 ANKX 12...Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

90° Endmills Carrying H490 ANKX 17... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 E90AX-17
90° Endmills Carrying H490 ANKX 17... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

Multifunction Endmills which can Carry Several Insert Geometries HCE
Multifunction Endmills which can Carry Several Insert Geometries

Ball Nose Multifunction Endmills D=10 mm HCM D10
Ball Nose Multifunction Endmills D=10 mm

Ball Nose Multifunction Endmills D=12 mm HCM D12
Ball Nose Multifunction Endmills D=12 mm

Ball Nose Multifunction Endmills D=16 mm HCM D16
Ball Nose Multifunction Endmills D=16 mm

Ball Nose Multifunction Endmills D=20 mm HCM D20
Ball Nose Multifunction Endmills D=20 mm

Ball Nose Multifunction Endmills D=25 mm HCM D25
Ball Nose Multifunction Endmills D=25 mm

Endmills for HM90 AP.. 1003... Inserts HM90 E90A-10
Endmills for HM90 AP.. 1003... Inserts

90° Endmills for HM90 ADKT-1505... Inserts HM90 E90AD-15
90° Endmills for HM90 ADKT-1505... Inserts

Long Reach Endmills for Machining Aluminum, with HM90 AXCR 1505... Inserts HM90 EAL-15
Long Reach Endmills for Machining Aluminum, with HM90 AXCR 1505... Inserts

Long Reach Endmills for Machining Aluminum, with HM90 APCR 1605 Inserts HM90 EAL-16
Long Reach Endmills for Machining Aluminum, with HM90 APCR 1605 Inserts

Endmills for Machining Aluminum, Carrying HM90 APCR 1605... Inserts with Corner Radii Equal or Larger Than 5 mm HM90 EAL-16BR
Endmills for Machining Aluminum, Carrying HM90 APCR 1605... Inserts with Corner Radii Equal or Larger Than 5 mm

Long Reach Endmills for Machining Aluminum, with HM90 APCR 2206... Inserts HM90 EAL-22
Long Reach Endmills for Machining Aluminum, with HM90 APCR 2206... Inserts

Endmills with HELIPLUS HP ANKT 0702.. Inserts HP E90AN-07
Endmills with HELIPLUS HP ANKT 0702.. Inserts

90° Endmills with HP AD.. 2207.. Inserts HP E90AT-22
90° Endmills with HP AD.. 2207.. Inserts

Side Plungers Carrying Tangentially Clamped Inserts with 4 Cutting Edges HTP-LN06
Side Plungers Carrying Tangentially Clamped Inserts with 4 Cutting Edges

Side Plungers Carrying Tangentially Clamped Inserts with 4 Cutting Edges HTP-LN10
Side Plungers Carrying Tangentially Clamped Inserts with 4 Cutting Edges

Solid Carbide Boring Bar for Small Diameters Using WCGT Trigon Inserts MG-SWUCR
Solid Carbide Boring Bar for Small Diameters Using WCGT Trigon Inserts

Indexable Threading Endmills with Cylindrical Carbide Shanks MTSR-C
Indexable Threading Endmills with Cylindrical Carbide Shanks

Indexable Threading Endmills with Cylindrical Carbide Shanks, for Single Point Inserts MTSR-C-SINGLE
Indexable Threading Endmills with Cylindrical Carbide Shanks, for Single Point Inserts

Shanks for BAYO T-REAM Interchangeable Head Reamers RM-BNT-3D/5D/8D (shanks)
Shanks for BAYO T-REAM Interchangeable Head Reamers

Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD SCD-ACP5 (5xD)
Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD

Solid Carbide Drills without Coolant Holes, Drilling Depth 5xD, DIN 6537 SCD-AG5 (5xD)
Solid Carbide Drills without Coolant Holes, Drilling Depth 5xD, DIN 6537

Solid Carbide Drills for Hard Materials, Drilling Depth 5xD SCD-AH5 (5xD)
Solid Carbide Drills for Hard Materials, Drilling Depth 5xD

Solid Carbide Drills without Coolant Holes, Drilling Depth 3xD, DIN 6537 SCD-AP3 (3xD)
Solid Carbide Drills without Coolant Holes, Drilling Depth 3xD, DIN 6537

Solid Carbide Drills without Coolant Holes, Drilling Depth 4xD, DIN 6537 SCD-AP4 (4xD)
Solid Carbide Drills without Coolant Holes, Drilling Depth 4xD, DIN 6537

Solid Carbide Drills without Coolant Holes, Drilling Depth 5xD SCD-AP5 (5xD)
Solid Carbide Drills without Coolant Holes, Drilling Depth 5xD

Solid Carbide Drills without Coolant Holes, Drilling Depth 6xD, DIN 6537 SCD-AP6 (6xD)
Solid Carbide Drills without Coolant Holes, Drilling Depth 6xD, DIN 6537

Endmills with Tangentially Clamped Inserts T290 ELN-05
Endmills with Tangentially Clamped Inserts

Endmills with Tangentially Clamped Inserts T290 ELN-10
Endmills with Tangentially Clamped Inserts

Extended Flute Endmills with T290 LNMT/HT 0502... Tangentially Clamped Inserts T290 LNK-05
Extended Flute Endmills with T290 LNMT/HT 0502... Tangentially Clamped Inserts

90° Face Mills Using Tangentially Clamped Inserts with 4 Helical, 8 mm Long Cutting Edges T490 ELN-08
90° Face Mills Using Tangentially Clamped Inserts with 4 Helical, 8 mm Long Cutting Edges

90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, 13 mm Long Cutting Edges T490 ELN-13
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, 13 mm Long Cutting Edges

90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, 16 mm Long Cutting Edges T490 ELN-16
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, 16 mm Long Cutting Edges

Extended Flute Endmills with T490 LNMT/HT 13... Tangentially Clamped Inserts T490 LNK-13
Extended Flute Endmills with T490 LNMT/HT 13... Tangentially Clamped Inserts




Terms of Use and Legal Disclaimer