HSK A-FM :  DIN 6353 face mill holders with HSK DIN69893 form A taper shanks.  
 .
 
RUNOUT (EXTERNAL) 0.005  HARDNESS 58-60  SURFACE FINISH N5  G2.5/33000 RPM 
Related tool for: HSK A-FM

90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, 13 mm Long Cutting Edges T490 FLN-13
90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, 13 mm Long Cutting Edges

90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, 16 mm Long Cutting Edges T490 FLN-16
90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, 16 mm Long Cutting Edges

Heavy Duty 90° Face Mills with 3M AXKT 2006.. Inserts 3M F90AX-20
Heavy Duty 90° Face Mills with 3M AXKT 2006.. Inserts

Heavy Duty Extended Flute Shell Mills with 3M AXKT 1304.../2006... Inserts 3M SM
Heavy Duty Extended Flute Shell Mills with 3M AXKT 1304.../2006... Inserts

45° Face Mills with LN..1506... Tangentially Clamped Inserts F45LN-N15
45° Face Mills with LN..1506... Tangentially Clamped Inserts

45° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges F45NM
45° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges

45° Screw Clamped Face Mills with SEK/MT 12... Inserts F45ST
45° Screw Clamped Face Mills with SEK/MT 12... Inserts

45° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges F45WG
45° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges

75° Face Mills with HM90 AD..-1505... Inserts F75A
75° Face Mills with HM90 AD..-1505... Inserts

90° Face Mills with TPKN/R Inserts F90
90° Face Mills with TPKN/R Inserts

90° Face Mills with LN..1106... Tangentially Clamped Inserts F90LN-N11
90° Face Mills with LN..1106... Tangentially Clamped Inserts

90° Face Mills with LN..1506... Tangentially Clamped Inserts F90LN-N15
90° Face Mills with LN..1506... Tangentially Clamped Inserts

90° Face Mills with S/QDM. 12... Inserts (Japanese standard) F90SD-12
90° Face Mills with S/QDM. 12... Inserts (Japanese standard)

90° Face Mills Using SDMT 1606... Inserts F90SD-16
90° Face Mills Using SDMT 1606... Inserts

Full Slot, Flange-Type Slotting Cutters FDN
Full Slot, Flange-Type Slotting Cutters

Full Slot, Flange Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts FDN-CALN11
Full Slot, Flange Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts

Full Slot, Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts FDN-CALN12
Full Slot, Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts

Full Slot, Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506... Inserts (18.9-25.6 mm width range) FDN-CALN15
Full Slot, Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506... Inserts (18.9-25.6 mm width range)

90° Face Mills Carrying H490 ANKX 12.. Double-Sided, Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-12
90° Face Mills Carrying H490 ANKX 12.. Double-Sided, Rectangular Inserts with 4 Helical Cutting Edges

90° Face Mills with HM90 ADKT 1505... Inserts HM90 F90A-15
90° Face Mills with HM90 ADKT 1505... Inserts

Face Mills Carrying Octagonal, Round and High Feed Segmented Radius Inserts HOF
Face Mills Carrying Octagonal, Round and High Feed Segmented Radius Inserts

Moderate Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges MF FWX-05
Moderate Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges

45° Face Mills Carrying Economical Inserts with 8 Helical Right-Hand Cutting Edges S845 F45SX-16
45° Face Mills Carrying Economical Inserts with 8 Helical Right-Hand Cutting Edges

Extended Flute Shell Mills with HM90 ADKT 1505... Inserts SM
Extended Flute Shell Mills with HM90 ADKT 1505... Inserts

45° Face Mills, Carrying Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges SOF45
45° Face Mills, Carrying Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges

65° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, 22 mm Long Cutting Edges T465 FLN-22
65° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, 22 mm Long Cutting Edges




Terms of Use and Legal Disclaimer