CCLNR/L
Clamp Lock Toolholders for Ceramic 80° Rhombic Negative Inserts
|
|
CKJNR/L
Top Clamp Toolholders with 93° Lead Angle for 55° Negative Parallelogram Inserts
|
|
CKNNR/L
Top Clamp Toolholders with 75° Lead Angle for 55° Negative Parallelogram Inserts
|
|
CRDNN
Clamp Lock Neutral Toolholders for Ceramic Round Negative Inserts
|
|
CRGCR-CEB
Clamp Lock Toolholders for Ceramic Round RCGX Inserts with V-Shaped Bottom
|
|
CRGNR/L
Clamp Lock Toolholders for Ceramic Round Negative Inserts
|
|
CSDNN-CE
45° Lead Angle Toolholders Using Square Ceramic Inserts
|
|
CSDPN
Clamp Lock Toolholders for 11° Clearance Square Inserts
|
|
CSKNR/L
75° Lead Angle Toolholders Using Square Ceramic Inserts for Face Turning
|
|
CSRNR/L
75° Lead Angle Toolholders Using Square Ceramic Inserts
|
|
CSSNR/L-CE
45° Lead Angle Toolholders Using Square Ceramic Inserts for Longitudinal and Face Turning
|
|
CSSPR/L
Clamp Lock Toolholders for 11° Clearance Square Inserts, for Longitudinal and Face Turning
|
|
CTFPR/L
Clamp Lock Toolholders for Face Turning, Carrying 11° Clearance Triangular Inserts
|
|
CTGPR/L
Clamp Lock Toolholders for 11° Clearance Triangular Inserts
|
|
CTJNR/L
93° Lead Angle Toolholders Using Triangular Ceramic Inserts
|
|
DCBNR/L
R-Clamp Toolholders with 75° Lead Angle for the 100° Corner of CNMG Inserts
|
|
DCLNR/L
R-Clamp Toolholders with 95° Lead Angle for 80° Negative Rhombic Inserts
|
|
DDJNR/L
R-Clamp Toolholders with 93° Lead Angle for 55° Negative Rhombic Inserts
|
|
DGTR/L
Integral Shank Parting and Grooving Toolholders
|
|
DGTR/L-B/BC-D
Integral Shank Reinforced Parting and Grooving Toolholders
|
|
DSBNR/L
75° Lead Angle R-Clamp External Turning Tools for ISO Negative SNMG Inserts
|
|
DSDNN
45° Lead Angle R-Clamp External Turning Tools for ISO Negative SNMG Inserts
|
|
DSKNR/L
75° Lead Angle R-Clamp Face Turning Tools for ISO Negative SNMG Inserts
|
|
DSSNR/L
45° Lead Angle R-Clamp Longitudinal and Facing Toolholders for Negative Square Inserts
|
|
DTGNR/L
91° Lead Angle R-Clamp External Turning Tools for Negative Triangular Inserts
|
|
DWLNR/L
External 95° Lead Toolholders for Negative WNMG Trigon Inserts
|
|
FGHR/L
Tools for Interrupted Cuts and Back Turning of Aluminum Wheels
|
|
FTHN
Square Shank Toolholders for FTB Profile Turning Inserts
|
|
GEHSR/L
External Machining Holders, for Swiss-Type and Automatic Machines
|
|
GHDKR/L
External and Internal Profiling Holders for Machining Aluminum Wheels
|
|
|
|
|
|
GHFG-R/L-8
Holders for Face Grooving and Turning Along Shafts
|
|
GHFGR/L-8
Holders for Face Grooving and Turning
|
|
GHGR/L
External Holders for Deep Grooving and Parting
|
|
GHMPR/L
Perpendicular Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Profile Inserts
|
|
GHMR/L
Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Profile Inserts
|
|
GHMUR/L
External Holders for 45° Undercutting
|
|
GHVR/L
Internal and External Profiling Holders for Machining Aluminum Wheels
|
|
HELIR/L
External Holders for Turning, Grooving and Parting
|
|
HFHPR/L-M
Perpendicular Toolholders for Shallow Face Grooving
|
|
HFHR/L-3T
Integral Holders for Facing, Dmin. 25 mm
|
|
HFHR/L-4T
Integral Holders for Facing, Dmin. 25 mm
|
|
HFHR/L-5T
Integral Holders for Facing, Dmin. 25 mm
|
|
HFHR/L-6T
Integral Holders for Facing, Dmin. 26 mm
|
|
HFHR/L-M
Toolholders for Shallow Face Grooving
|
|
MCLNR/L
Pin and Clamp Toolholders for 80° Negative Rhombic Inserts
|
|
MTENN-W
Neutral Wedge Lock Toolholders for Negative Triangular Inserts
|
|
MTJNR/L-W
93° Lead Angle Wedge Lock Turning Tools for Negative Triangular Inserts
|
|
MULNR/L-12MW
MULTI-WEDGE Lock External Toolholders for 80° Negative Rhombic, Trigon and Square Inserts
|
|
MVJNR/L
Pin and Clamp Toolholders for 35° Negative Rhombic Inserts
|
|
MVVNN
Pin and Clamp Toolholders for 35° Negative Rhombic Inserts
|
|
MWLNR/L-W
Top Wedge Lock External Toolholders for Trigon Inserts
|
|
PCBNR/L
Lever Lock Toolholders for the 100° Corner of CNMG Inserts
|
|
PCHR/L-24
Grooving, Parting and Recessing Holders for Inserts with 5 Cutting Edges
|
|
PCLNR/L
Lever Lock Toolholders for 80° Negative Rhombic Inserts
|
|
PCLNR/L-12-JHP
Lever Lock Toolholders for 80° Negative Rhombic Inserts with Channels for High Pressure Coolant
|
|
PCLNR/L-12X-JHP
Lever Lock Toolholders for CNMX-HT/MW HELITURNLD 80° Rhombic Inserts with Channels for High Pressure Coolant
|
|
PCLNR/L-X
Lever Lock Toolholders for CNMX-HTW HELITURNLD 80° Rhombic Inserts
|
|
PDJNR/L
Lever Lock Toolholders for 55° Negative Rhombic Inserts
|
|
PDJNR/L-15-JHP
Lever Lock Toolholder for 55° Negative Inserts with Channels for High Pressure Coolant
|
|
PHGR/L
Holders for External Grooving and Turning
|
|
PLANR/L-TANG
Lever Lock Toolholders for LNMX.. Tangentially Clamped Inserts
|
|
PLFNR/L-TANG
Lever Lock Holders with Tangential LNMX Inserts for Facing and Longitudinal Heavy Turning
|
|
PQFNR/L
Lever Lock Face Turning Toolholders for Negative Inserts with Four 80° Corners
|
|
PQLCR/L
Lever Lock Toolholders for 80° Positive 4-Cornered Inserts
|
|
PQLNR/L
Lever Lock Toolholders for Negative Inserts with Four 80° Corners
|
|
PQSNR/L
External 45° Lead Toolholders for Negative Inserts with Four 80° Corners
|
|
PSBNR/L
75° Lead Angle Lever Lock External Turning Tools for ISO Negative SNMG Inserts
|
|
PSDNN
45° Lead Angle Lever Lock External Turning Tools for ISO Negative SNMG Inserts
|
|
PSKNR/L
75° Lead Angle Lever Lock Face Turning Tools for ISO Negative Square Inserts
|
|
PSSNR/L
45° Lead Angle Lever Lock Longitudinal and Facing Toolholders for Negative Square Inserts
|
|
PTFNR/L
91° Lead Angle Lever Lock Face Turning Tools for Negative Triangular Inserts
|
|
PTGNR/L
91° Lead Angle Lever Lock External Turning Tools for Negative Triangular Inserts
|
|
PWLNR/L
Lever Lock External Turning Toolholders for 80° Negative Trigon Inserts
|
|
PWLNR/L-08-JHP
Lever Lock Toolholders for Trigon Inserts with Channels for High Pressure Coolant
|
|
PWLNR/L-08X-JHP
Lever Lock Toolholders for HELITURN LD WNMX-HT/MW Trigon Inserts with Channels for High Pressure Coolant
|
|
PWLNR/L-X
Lever Lock External Turning Toolholders for Negative HELITURNLD Trigon Inserts
|
|
SCLCR/L
Screw Lock Toolholders for 80° Diamond Inserts with 7° Clearance Angle
|
|
SDJCR/L
Screw Lock Toolholders for 55° Diamond Inserts with 7° Clearance Angle
|
|
SDNCN
Screw Lock Toolholders for 55° Diamond Inserts with 7° Clearance Angle
|
|
SER/L
External Threading Toolholders
|
|
SGFFR/L
Face Grooving Integral Shank Tools
|
|
SGTFR/L
SELF-GRIP, Integral Shank Tool for Parting & Grooving
|
|
SKJNR/L
Screw Clamp Toolholders with 93° Lead Angle for 55° Negative Parallelogram Inserts
|
|
SLANR/L-TANG
Toolholders for LNMX Tangentially Clamped Inserts
|
|
SLFNR/L-TANG
Toolholders for LNMX Tangentially Clamped Inserts
|
|
SLLNR/L-HF
Screw Clamped Toolholders for Fast Metal Removal in Longitudinal Turning
|
|
SRDCN
Screw Lock Neutral Toolholders for Round Inserts with 7° Clearance Angle
|
|
SRGCR/L
Screw Lock Toolholders for Round Inserts with 7° Clearance Angle
|
|
SSBCR/L
75° Lead Angle Screw Lock Toolholders for Square Inserts with 7° Clearance Angle
|
|
SSSCR/L
45° Lead Angle Screw Lock Toolholders for Square Inserts with 7° Clearance Angle
|
|
STFCR/L
Screw Lock Toolholders for Triangular Inserts with 7° Clearance Angle for Face Turning
|
|
STGCR/L
91° Lead Angle Screw Lock Toolholders for Triangular Inserts with 7° Clearance Angle
|
|
SUXCR/L-CM
Screw Lock Toolholders for Four Different 7° Clearance Geometries
|
|
SVJCR/L
93° Lead Angle Screw Lock Toolholders for 35° Diamond Inserts with 7° Clearance Angle
|
|
SVJCR/L-16-JHP
Screw Lock Toolholders for 35° Rhombic Inserts with 7° Clearance Angle and Channels for High Pressure Coolant
|
|
SVJNR/L-F
Screw Lock Toolholders for 35° Negative Inserts with a Wedge for High Rigidity in Profiling Applications
|
|
SVVCN
72.5° Lead Angle Screw Lock Toolholders for 35° Diamond Inserts with 7° Clearance Angle
|
|
SVVNN-F
Screw Lock Toolholders for 35° Negative Inserts with a Wedge for High Rigidity in Profiling Applications
|
|
SVXCR/L
112° Lead Angle Screw Lock Toolholders for 35° Diamond Inserts with 7° Clearance Angle
|
|
SXCNN
External Toolholders for Specially Tailored Wide Profile Inserts
|
|
TCBNR/L-CH
75° Lead Angle Toolholders Using the 100° Corner of CNGX 80° Negative Rhombic Ceramic Dimpled Inserts
|
|
TCKNR/L-CH
75° Lead Angle Toolholders Using the 100° Corner of CNGX 80° Negative Rhombic Ceramic Dimpled Inserts for Facing
|
|
TCLNR/L-CH
95° Lead Angle Toolholders for Negative CNGX 80° Rhombic Ceramic Dimpled Inserts
|
|
TDJNR/L-CH
93° Lead Angle Toolholders Using 55° Rhombic Dimpled Ceramic Inserts
|
|
TDNNN-CH
62.5° Lead Angle Toolholders Using 55° Rhombic Dimpled Ceramic Inserts
|
|
TGDR/L
External Holders for Turning, Grooving and Profiling
|
|
TSDNN-CH
45° Lead Angle Toolholders Using Square Dimpled Ceramic Inserts
|
|
TSRNR/L-CH
75° Lead Angle Toolholders Using Square Ceramic Dimpled Inserts
|
|
TSSNR/L-CH
45° Lead Angle Toolholders Using Square Dimpled Ceramic Inserts
|
|
