ADKT 1505..R/L-HM :  HELIMILL inserts with 2 helical cutting edges and various corner radii for general use.  
 
 
Bottom Shouldering Counter boring Countersinking Drill mill Facing Plunging & recessing Ramp down Shouldering Side slotting
Slanted shoulder. & chamfer. Slotting
  Designation
r
W
F
l
ap
S		 fz
(min)		 fz
(max)
  Grade
  ADKT 150516L-HM  1.60  9.57  1.37  15.60  13.85  5.60  0.08  0.15 IC328
  ADKT 150516R-HM  1.60  9.57  1.37  15.60  13.85  5.60  0.08  0.15 IC28 IC328 IC830 IC928 IC635 IC50M IC250 IC950 IC4050 IC908 IC910 IC520M IC20
  ADKT 150520R-HM  2.00  9.57  -  14.80  13.50  5.20  0.08  0.15 IC328
  ADKT 150524L-HM  2.50  9.57  0.52  15.60  13.80  5.60  0.08  0.15 IC328
  ADKT 150524R-HM  2.50  9.57  0.52  15.60  13.80  5.60  0.08  0.15 IC28 IC328 IC830 IC928 IC250 IC950 IC910 IC520M IC20
  ADKT 150532L-HM  3.20  9.57  -  15.50  13.70  5.60  0.08  0.15 IC328
  ADKT 150532R-HM  3.20  9.57  -  15.50  13.70  5.60  0.08  0.15 IC28 IC328 IC830 IC928 IC635 IC50M IC250 IC950 IC908 IC30N IC910 IC520M IC20
  ADKT 150540L-HM  4.00  9.57  -  15.40  13.65  5.60  0.08  0.15 IC328
  ADKT 150540R-HM  4.00  9.57  -  15.40  13.65  5.60  0.08  0.15 IC28 IC328 IC928
  ADKT 150550L-HM  5.00  9.57  -  15.10  13.50  5.30  0.08  0.15 IC328
  ADKT 150550R-HM  5.00  9.57  -  15.10  13.50  5.30  0.08  0.15 IC28 IC328 IC928 IC635 IC50M IC250 IC950 IC520M
  ADKT 150564L-HM  6.20  9.57  -  14.80  13.20  5.30  0.08  0.15 IC328
  ADKT 150564R-HM  6.20  9.57  -  14.80  13.20  5.30  0.08  0.15 IC28 IC830 IC928 IC635 IC50M IC250 IC950 IC520M

Inserts with corner radii larger than 0.8 mm should be used on ADK & SM tools only on the face of the cutter.
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer