ER-SRK-JET2 :  SHRINKIN thermal shrinking chuck with two internal cooling jets and an integral ER collet. To be used for carbide tools only.  
 
 
100 BAR (1450 PSI) MAX. RUNOUT (INT) 0.003MM(.00012 HARDNESS 58-60 SURFACE FINISH N5 SHRINKIN
  Designation
SS
d2
L1
L3		 L
min		 L
max
D2
D1
J
KeyHex key size for the rear stopper screw
Kg
  ER20 SRK 6X35 JET2  ER20  6.00  35.0  25.50  18.0  24.0  13.50  11.0  M8  4.00  0.07
  ER20 SRK 6X60 JET2  ER20  6.00  60.0  29.50  18.0  24.0  13.50  11.0  M8  4.00  0.09
  ER25 SRK 6X35 JET2  ER25  6.00  35.0  26.00  18.0  24.0  14.70  11.0  M8  4.00  0.11
  ER25 SRK 6X60 JET2  ER25  6.00  60.0  44.50  18.0  24.0  17.30  11.0  M8  4.00  0.14
  ER32 SRK 6X35 JET2  ER32  6.00  35.0  25.50  18.0  24.0  14.70  11.0  M8  4.00  0.15
  ER32 SRK 6X60 JET2  ER32  6.00  60.0  45.00  18.0  24.0  17.30  11.0  M8  4.00  0.19
  ER32 SRK 6X85 JET2  ER32  6.00  85.0  69.50  18.0  26.0  20.80  11.0  M8  4.00  0.25

For carbide tools only.
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer