FF FW :  FEEDMILL, fast feed face mills using FF WOMT... inserts. Can run at very high feed rates of up to 3.5 mm/t at small DOC, resulting in very high metal removal rates.  
 
 
Facing Profiling Plunging & recessing Side plunging Ramp down Helical interpolation COOLANT
  Designation
D1
D		 ap
(max)
Z
L
Da
Rd°
ArborFor adaptation click on More Info
Nxcm
Kg
  FF FW D40-16-06-C  40.0  26.00  1.50  4  35.00  16.00  2.5  A  200  0.16
  FF FW D50-22-06-C  50.0  36.00  1.50  5  40.00  22.00  2.0  A  200  0.30
  FF FW D52-22-06-C  52.0  38.00  1.50  5  40.00  22.00  1.9  A  200  0.34
  FF FW D50-22-09-C  50.0  29.20  2.00  4  50.00  22.00  4.0  A  500  0.33
  FF FW D52-22-09-C  52.0  31.20  2.00  4  40.00  22.00  4.0  A  500  0.26
  FF FW D63-22-09-C  63.0  42.20  2.00  5  40.00  22.00  3.0  A  500  0.47
  FF FW D63-22-09-CP  63.0  42.20  2.00  4  40.00  22.00  3.0  A  500  0.65
  FF FW D63-27-09-C  63.0  42.20  2.00  5  50.00  27.00  3.0  A  500  0.76
  FF FW D66-22-09-C  66.0  45.20  2.00  5  40.00  22.00  2.8  A  500  0.55
  FF FW D66-27-09-C  66.0  45.20  2.00  5  50.00  27.00  2.8  A  500  0.64
  FF FW D80-31.75-09-C  80.0  59.20  2.00  5  60.00  31.75  0.5  A  500  1.18
  FF FW D80-32-09-C  80.0  59.20  2.00  5  50.00  32.00  2.0  A  500  0.97
  FF FW D100-31.75-09-C  100.0  79.20  2.00  6  63.00  31.75  2.0  B  500  2.31
  FF FW D100-32-09-C  100.0  79.20  2.00  6  50.00  32.00  1.5  B  500  1.32
  FF FW D125-38.1-09-C  125.0  104.20  2.00  7  63.00  38.10  1.0  B  500  3.16
  FF FW D125-40-09-C  125.0  104.20  2.00  7  63.00  40.00  1.0  B  500  2.48

The CP (Coarse Pitch) tools were designed to run 2.5 mm/tooth at 2 mm DOC, while the regular pitch cutter run at 3.5 mm/tooth at 1 mm DOC.
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer