MM ERS :  MULTI-MASTER interchangeable solid carbide, rough milling heads, used for high metal removal applications.  
 
 
Shouldering Slotting Ramp down Helical interpolation Plunging & recessing
  Designation
D
Flute
ap
Ts
D2
l
Ch
Ha°
Rd°		 fz
(min)		 fz
(max)
  Grade
  MM ERS080B05-4T05  8.00  4  5.00  T05  7.70  10.00  0.25  45.0  90.0  0.03  0.08 IC908
  MM ERS080B09-4T05  8.00  4  9.00  T05  7.70  15.00  0.25  45.0  90.0  0.03  0.08 IC908
  MM ERS100B07-4T06  10.00  4  7.00  T06  9.60  13.00  0.30  45.0  90.0  0.03  0.09 IC908
  MM ERS120B09-4T08  12.00  4  9.00  T08  11.70  16.50  0.35  45.0  90.0  0.04  0.10 IC908
  MM ERS120B09-4T08-H  12.00  4  9.00  T08  11.70  16.50  0.35  45.0  90.0  0.04  0.10 IC908
  MM ERS120B14-4T08  12.00  4  14.00  T08  11.70  23.00  0.35  45.0  90.0  0.04  0.10 IC908
  MM ERS.500B37-4T08  12.70  4  9.50  T08  12.40  16.50  0.35  45.0  90.0  0.04  0.10 IC908
  MM ERS160B12-5T10  16.00  5  12.00  T10  15.30  20.50  0.40  45.0  7.0  0.04  0.10 IC908
  MM ERS160B12-5T10-H  16.00  5  12.00  T10  15.30  20.50  0.40  45.0  7.0  0.04  0.10 IC908
  MM ERS200B15-6T12  20.00  6  15.00  T12  18.30  25.50  0.40  45.0  3.0  0.05  0.11 IC908
  MM ERS250B22-6T15  25.00  6  22.00  T15  23.90  37.00  0.50  45.0  3.0  0.05  0.11 IC908
  MM ERS1.00B86-6T15  25.40  6  22.00  T15  23.90  37.00  0.50  45.0  3.0  0.04  0.10 IC908

For Clamping keys (should be ordered separately), tightening torques and clamping instructions, click on "More Info".
Do not apply lubricant to the threaded connection.
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer