MM EA :  MULTI-MASTER, Interchangeable solid carbide slot drill milling heads with two or three 45° helix flutes. Used for machining aluminum.  
 Aluminum
 
Shouldering Slotting Ramp down Helical interpolation Drill mill Plunging & recessing
  Designation
D
Flute
ap
r
Ts
D2
l
Ha°		 fz
(min)		 fz
(max)
  Grade
  MM EA120B09R0.5-2T08  12.00  2  9.00  0.50  T08  11.70  16.50  45.0  0.04  0.11 IC08
  MM EA120B09R1.0-2T08  12.00  2  9.00  1.00  T08  11.70  16.50  45.0  0.04  0.11 IC08
  MM EA120B08R0.5-3T08  12.00  3  8.00  0.50  T08  11.70  16.50  45.0  0.04  0.11 IC08
  MM EA120B08R1.0-3T08  12.00  3  8.00  1.00  T08  11.70  16.50  45.0  0.04  0.11 IC08
  MM EA120B08R3.0-3T08  12.00  3  8.00  3.00  T08  11.70  16.50  45.0  0.04  0.11 IC08
  MM EA.500B37R000-2T08  12.70  2  9.50  0.00  T08  12.40  16.50  45.0  0.04  0.11 IC08
  MM EA.500B37R020-2T08  12.70  2  9.50  0.50  T08  12.40  16.50  45.0  0.04  0.11 IC08
  MM EA.500B31R031-3T08  12.70  3  8.00  0.80  T08  12.40  16.50  45.0  0.04  0.11 IC08
  MM EA.500B31R062-3T08  12.70  3  8.00  1.60  T08  12.40  16.50  45.0  0.04  0.11 IC08
  MM EA.500B31R094-3T08  12.70  3  8.00  2.40  T08  12.40  16.50  45.0  0.04  0.11 IC08
  MM EA.500B31R125-3T08  12.70  3  8.00  3.20  T08  12.40  16.50  45.0  0.04  0.11 IC08

For Clamping keys (should be ordered separately), tightening torques and clamping instructions, click on "More Info".
Do not apply lubricant to the threaded connection.
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer