RM-SHR-H7S-CS :  Solid carbide reamers with a cylindrical shank, straight flute-DIN 8093. C - solid carbide. CH - brazed solid carbide head with DIN 1809 tang.  
 
 
Blind & perpendicular hole Blind & radial groove Blind hole COOLANT
  Designation
Dr
L2
L1
L3
Flute
d
  Grade
  RM-SHR-0300-H7S-CS-C  3.000  61.0  30.0  15.0  6  3.00 IC07
  RM-SHR-0320-H7S-CS-C  3.200  70.0  33.0  18.0  6  3.20 IC07
  RM-SHR-0350-H7S-CS-C  3.500  70.0  33.0  18.0  6  3.50 IC07
  RM-SHR-0400-H7S-CS-C  4.000  75.0  44.0  19.0  6  4.00 IC07
  RM-SHR-0450-H7S-CS-C  4.500  80.0  46.0  21.0  6  4.50 IC07
  RM-SHR-0500-H7S-CS-C  5.000  86.0  53.0  23.0  6  5.00 IC07
  RM-SHR-0550-H7S-CS-C  5.500  93.0  56.0  26.0  6  5.60 IC07
  RM-SHR-0600-H7S-CS-C  6.000  93.0  56.0  26.0  6  5.60 IC07
  RM-SHR-0650-H7S-CS-C  6.500  101.0  63.0  28.0  6  6.30 IC07
  RM-SHR-0700-H7S-CS-C  7.000  109.0  69.0  31.0  6  7.10 IC07
  RM-SHR-0800-H7S-CS-C  8.000  117.0  75.0  33.0  6  8.00 IC07
  RM-SHR-0850-H7S-CS-CH  8.500  117.0  75.0  33.0  6  8.00 IC07
  RM-SHR-0900-H7S-CS-CH  9.000  125.0  81.0  36.0  6  9.00 IC07
  RM-SHR-1000-H7S-CS-CH  10.000  133.0  87.0  38.0  6  10.00 IC07
  RM-SHR-1100-H7S-CS-CH  11.000  142.0  96.0  41.0  6  10.00 IC07
  RM-SHR-1200-H7S-CS-CH  12.000  151.0  105.0  44.0  6  10.00 IC07
  RM-SHR-1300-H7S-CS-CH  13.000  151.0  105.0  44.0  6  10.00 IC07
  RM-SHR-1400-H7S-CS-CH  14.000  160.0  110.0  47.0  8  12.50 IC07
  RM-SHR-1500-H7S-CS-CH  15.000  162.0  112.0  50.0  8  12.50 IC07
  RM-SHR-1600-H7S-CS-CH  16.000  170.0  120.0  52.0  8  12.50 IC07

-C: Solid carbide
-CH: Brazed solid carbide head with DIN 1809 tang
Hole tolerance: H7 manufacturing tolerance according to DIN 1420
Reamers above 5 mm diameter have the tang back-end design
Available grades: IC07 (uncoated), optional: IC907 (TiAlN PVD coated)
Special diameters are available on request
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer