MM HC :  MULTI-MASTER, interchangeable, solid carbide slot drill milling heads with two 10° helix flutes. Available with a variety of corner radii (economical type).  
 Economical solution
 
Shouldering Slotting Ramp down Helical interpolation Drill mill Plunging & recessing
  Designation
D
Flute
ap
r
Ts
D2
l
Ha°
TmSpecially tailored radius range, available upon request.		 fz
(min)		 fz
(max)
  Grade
  MM HC078C08R0.2-2T05  7.80  2  7.70  0.20  T05  7.60  10.00  10.0  r0-2.0  0.03  0.09 IC908
  MM HC080C08R0.4-2T05  8.00  2  7.70  0.40  T05  7.60  10.00  10.0  r0-2.0  0.03  0.09 IC908 IC903
  MM HC080C08R1.0-2T05  8.00  2  7.70  1.00  T05  7.60  10.00  10.0  r0-2.0  0.03  0.09 IC908 IC903
  MM HC080C08R2.0-2T05  8.00  2  7.70  2.00  T05  7.60  10.00  10.0  r0-2.0  0.03  0.09 IC908 IC903
  MM HC098C10R0.3-2T06  9.80  2  9.00  0.30  T06  9.60  12.35  10.0  r0-3.0  0.03  0.10 IC908
  MM HC100C10R0.4-2T06  10.00  2  9.00  0.40  T06  9.60  12.35  10.0  r0-3.0  0.03  0.10 IC908 IC903
  MM HC100C10R1.0-2T06  10.00  2  9.00  1.00  T06  9.60  12.35  10.0  r0-3.0  0.03  0.10 IC908 IC903
  MM HC100C10R2.0-2T06  10.00  2  9.00  2.00  T06  9.60  12.35  10.0  r0-3.0  0.03  0.10 IC908 IC903
  MM HC117C13R0.3-2T08  11.70  2  10.00  0.30  T08  11.50  14.20  10.0  r0-3.0  0.04  0.11 IC908
  MM HC120C13R0.4-2T08  12.00  2  10.00  0.40  T08  11.50  14.20  10.0  r0-3.0  0.04  0.11 IC908 IC903
  MM HC120C13R1.0-2T08  12.00  2  10.00  1.00  T08  11.50  14.20  10.0  r0-3.0  0.04  0.11 IC908 IC903
  MM HC120C13R2.0-2T08  12.00  2  10.00  2.00  T08  11.50  14.20  10.0  r0-3.0  0.04  0.11 IC908 IC903
  MM HC.500C55R016-2T08  12.70  2  11.00  0.40  T08  11.50  15.25  10.0  r0-3.2  0.04  0.11 IC908
  MM HC140C11R0.4-2T08  14.00  2  11.60  0.40  T08  11.50  15.05  10.0  r0-4.0  0.04  0.12 IC908
  MM HC157C16R0.3-2T10  15.70  2  15.00  0.30  T10  15.20  19.05  10.0  r0-4.0  0.05  0.13 IC908
  MM HC160C16R0.4-2T10  16.00  2  14.90  0.40  T10  15.20  19.05  10.0  r0-4.0  0.05  0.13 IC908 IC903
  MM HC160C16R0.8-2T10  16.00  2  14.90  0.80  T10  15.20  19.05  10.0  r0-4.0  0.05  0.13 IC908 IC903

For Clamping keys (should be ordered separately), tightening torques and clamping instructions, click on "More Info".
Do not apply lubricant to the threaded connection.
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer