HP F90AT-22 :  HELIPLUS, 90° face mills with HP AD.. 2207... long edged inserts.  
 
 
Facing Shouldering Slotting Ramp down Counter boring
  Designation
D
Z
ap
L
Da
Rd°
ArborFor adaptation click on More Info
Coolant
Kg
  HP F90AT D50-3-22-22  50.00  3  21.00  50.00  22.00  5.0  A  Y  0.36
  HP F90AT D50-4-22-22  50.00  4  21.00  50.00  22.00  5.0  A  N  0.33
  HP F90AT D63-4-25.4-22  63.00  4  21.00  50.00  25.40  3.1  A  Y  0.72
  HP F90AT D63-4-27-22  63.00  4  21.00  50.00  27.00  3.1  A  Y  0.56
  HP F90AT D63-5-25.4-22  63.00  5  21.00  50.00  25.40  3.1  A  Y  0.72
  HP F90AT D63-5-27-22  63.00  5  21.00  50.00  27.00  3.1  A  N  0.53
  HP F90AT D80-4-25.4-22  80.00  4  21.00  50.00  25.40  1.8  B  Y  0.93
  HP F90AT D80-4-27-22  80.00  4  21.00  50.00  27.00  1.8  B  Y  0.76
  HP F90AT D80-6-25.4-22  80.00  6  21.00  50.00  25.40  1.8  B  Y  0.76
  HP F90AT D80-6-27-22  80.00  6  21.00  50.00  27.00  1.8  B  N  0.73
  HP F90AT D100-5-3175-22  100.00  5  21.00  50.00  31.75  1.9  B  Y  1.71
  HP F90AT D100-5-32-22  100.00  5  21.00  50.00  32.00  1.9  B  Y  1.40
  HP F90AT D100-7-3175-22  100.00  7  21.00  50.00  31.75  1.9  B  Y  1.70
  HP F90AT D100-7-32-22  100.00  7  21.00  50.00  32.00  1.9  B  N  1.37

Insert clamping/unclamping procedure: First loosely attach the rear clamping screw, then the face screw. In the same order, tighten them both.
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer