HSK A-SRKIN :  SHRINKIN, thermal chuck collets with HSK DIN69893 Form A Tapered Shanks. For solid carbide and HSS tools.  
 
 
RUNOUT (INT) 0.003MM(.00012 HARDNESS 50-52 SURFACE FINISH N5 SHRINKIN G2.5/HSK50,63=25000RPM @ HSK100=20000RPM COOLANT
  Designation
SS
d2
D1
D2
L
L1
L3		 L
min		 L
max
J
KeyAdjustment screw hexagon key size
Kg
  HSK A 50 SRKIN 16X95  50  16.00  27.0  34.00  95.00  69.0  45.00  39.0  50.0  M10  5.00  0.71
  HSK A 63 SRKIN 16X120  63  16.00  27.0  34.00  120.00  94.0  44.00  39.0  50.0  M12  6.00  1.11
  HSK A 63 SRKIN 16X160  63  16.00  27.0  34.00  160.00  134.0  44.00  39.0  50.0  M12  6.00  1.41
  HSK A 63 SRKIN 16X75  63  16.00  27.0  34.00  75.00  49.0  -  39.0  50.0  -  -  0.85
  HSK A 63 SRKIN 16X95  63  16.00  27.0  34.00  95.00  69.0  44.00  39.0  50.0  M12  6.00  0.96
  HSK A 100 SRKIN 16X100  100  16.00  27.0  34.00  100.00  71.0  45.00  39.0  50.0  M12  6.00  2.35
  HSK A 100 SRKIN 16X120  100  16.00  27.0  34.00  120.00  91.0  45.00  39.0  50.0  M12  6.00  2.50
  HSK A 100 SRKIN 16X160  100  16.00  27.0  34.00  160.00  131.0  45.00  39.0  50.0  M12  6.00  2.74

A cooling tube must be used with all coolant through HSK spindles (should be ordered separately).
To be used for carbide tools only.
Use only inductive heating device for SRKIN holders.
For shank dimensions and shrink units information, Click on "More Info".
ISCAR can not guarantee an unbalance value less than 1 gr x mm.
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer